Creating Audio-Cds - ALCATECH BPM STUDIO 4 PRO User Manual

3.15.8. Creating Audio CDs
Select this mode if you want to create a CD that
can be played with any common CD player or
changer. The maximum play length depends on
the type of media you use, and vary between 74
and 80 minutes.
After confirming the dialog box by clicking
[OK] the selected CD format will be
displayed in the track list status bar.
Place the media to be recorded into the
Recorder. The CD status indicator below
the track list gives you information about
this media, and the
Recorder itself.
Now you can load any title or whole Play
Lists in the writers track list. This can be
done in different ways
1.) Drag & Drop from the from Play Lists, file
archive, or Play List archive.
2.) Via the clipboard, with "copy" and "paste"
(Ctrl – C / Ctrl – V)
3.) With the button you can load any Play
List present on the hard drive.
4.) With the button you can selected
tracks directly from your hard drive.
The status bar to the left indicates overall length
of the CD. Additionally a status bar below the track
list displays the remaining capacity of the media.
It is not necessary to convert MP3 files
into the WAVE format. All tracks can be
loaded into the writer as MP3s.
Decompression is done in real time
during the burn process.
(Pay attention not to exceeding the media's
maximum play length when assembling the title
list. If you do, an according message will warn
you before the write process.)
The title order can be modified by Drag&Drop.
Start writing with the
following dialog fields, progress can be monitored,
and modified.
At first, the Cue-Sheet will be created. It contains
information that will be written onto the media
parallel to the audio data, such as starting points,
title length and (if the Recorder supports this
function) CD text information. Upon completion,
a dialog with the calculated data will appear.
Here you can check if all the data is correct, if so
confirm with [next] and start the writing process.
Of course you can still abort with [cancel]
Please avoid writing CDs over a network.
If you use BPM Studio in a network, the
CD Writer should be local, with the MP3
or WAVE files to be burned.
CD Player / CD Writer
button. In the