Loop Sampler; Using The Loop Sampler - ALCATECH BPM STUDIO 4 PRO User Manual

With the loop sampler it is possible to clip
sequences from the title playing in the according
player, quickly and efficiently; for fur ther
processing like editing, playing, or storing for later
use. For each player, a loop sampler is available,
which can be opened by clicking the
[LOOP] button.
Loop samplers are independent modules,
which do by no means hinder regular
operation of BPM Studio Pro. The operation mode
of loop samplers is indicated by a blinking, red
dot in the player's display, located between TIME
and PITCH/BPM. It can also be seen in the
resource meter of the loop sampler. A red dot
stands for recording, while a green dot means
playback.
In the program options, remote control unit tab,
the record, stop, and play functions of the loop
sampler can be assigned to the multi purpose
buttons
control loop samplers, without having to display
them.
You can drag and drop samples on a
player button.
. Thus it is possible to

3.06.1. Using the Loop Sampler

Sample will be played into it's original
direction
Sample will be played backwards
Sample will be played alternating
forward and backward
Sample will be played to monitor
channel, instead of player channel
Starts recording
Stops both playback and recording
Plays the sample
Opens a dialog box, to save sample
as file
In the "save file" dialog box, either wave or mp-3
file format can be chosen for the sample
Moves the start point
Moves samples endpoint
Adjusts output level
from –99.9 dB to 0 dB
Adjusts playback speed
in a range from –20% to +20%

Loop Sampler