The Player Window - ALCATECH BPM STUDIO 4 PRO User Manual

3.02.6 The Player Window

In general, the player window is divided in two
areas. To the upper left hand area, a titles position
within a play list is indicated (TRACK) The center
area indicates optionally either past play time
(ELAPSED), or remaining play time (REMAIN)
You can easily switch between these two modes
by either clicking in the area, or on the
[TIME] button. You can also switch by
pressing the according button on the
remote control unit.
10 seconds before play time elapses, this
display will start to blink in red, thus
indicating the upcoming end of this title.
The top right area optionally indicates the BPM
of a particular title (this information is retrieved
out of he titles ID3-tag), or it's pitch value. As
before, here you can also define these settings
by simply clicking into the area.
The bottom left area shows a resource meter
(audio data buffer size), followed by a spectrum
analyzer. In this display the following modes are
available, to be switched also by mouse click into
the display area:
OFF (very efficient on resources)
Standard balance display
32 Frequencies display with peak levels
32 Frequencies display without peak levels
64 Frequencies display with peak levels
64 Frequencies display without peak levels
Amplitude, chronological
Scrolling title and performer information
The pop up menu allows you to switch between
spectrum analyzer, and cue point buttons menu
Player