Setting Directcue Points On-The-Fly; Editing Of Directcue Points; Deleting Of Directcue Points; Deleting Of All Directcue Points - ALCATECH BPM STUDIO 4 PRO User Manual

Press the Direct Cue key within this 10 seconds
to store the Cue-Point onto this key.
The [MEMORY] key [13] is extinguished and the
selected Direct-Cue key lights in red.
Now, the title can be started any time from this
point by pressing the Direct-Cue key.
The DirectCue points cannot be loaded
into the Player in Autofade Mode.
Please do NOT use this mode, if you
want to use stored DirectCue's.
8.2.5. Setting DirectCue points
on- the-fly
You can store Cue-Points directly to the DirectCue
keys, while a title is played. Simply press the
[MEMORY] key [13] during play and then at the
desired time point (but within 20 seconds) on the
selected DirectCue key. Each pressing of
DirectCue key prolongs the holding time of the
[MEMORY] key by 20 seconds.
Professional working with RCP-2001

8.2.6. Editing of DirectCue points

Start the title to edit the DirectCue point by
pressing the corresponding DirectCue key.
Then stop the Player by pressing the [CUE] key
[4]. Now, you can edit the Cue-Point as written
on the previous pages. Changes can be
transferred by using the key combination
[MEMORY] and pressing the corresponding
DirectCue key anew.
8.2.7. Deleting of Direct-Cue points
Hold the [MEMORY] key pressed and then press
the Direct-Cue key you wish to delete within 3
seconds.
8.2.8. Deletion of all DirectCue points

and the Loop Player

Hold the [MEMORY] key pressed longer than 3
seconds. Then, all the 6 DirectCue keys and the
contents of the Loop Player will be deleted.
By a Checkbox in the program options you
can prevent that pressing a DirectCue key
will result in an immediate start of the Player
by a Cue-Point or a stored Loop, if the
Player is in the Pause or Cue Mode. If the
Checkbox "Cue Memory Direct Start" is
deactivated, then Cue-Points are merely
taken into the Player and primarily started
by the [PLAY/PAUSE] key or the [EXIT/
RELOOP] key.