The First Program Start; Defining Remote Control Unit Parameters - ALCATECH BPM STUDIO 4 PRO User Manual

Installation

2.04. The First Program Start

Double click the program icon on
the desktop or, from your
windows start menu choose:
programs -> ALCATech -> BPM
Studio. The program will now start, and ask if you
want the small player to be default player for MP-
3 files. If you do not want the player to be your
default program for such files, click no. You can
also prevent this dialog from showing at the next
program start, by checking the "don't ask me
again" check box.
Upon this, the program will search for all local
MP-3 files on your system, The search result will
be shown in the "HARD DRIVE" group in File
Archive.
Now the PC's serial ports defined in the program
options will be scanned for ALCATech remote
control units. If one is found, the program will
announce so. Now you can start your work.
Read our step-by-step instructions how to get
familiar with the hard- and software, and how to
create file and play lists.
2.05. Defining Remote Control
Unit Parameters
BPM Studio remote control units allow for
variable, individual settings. Thus, for example,
the pitch slider
can be used
either to adjust
the pitch value or,
alternatively as
the player's
volume control. To
adjust such
settings, choose
"options" in the
players pop up
menu (Right click
into the play list
area), and click
on the control unit
tab.
In this tab you can, depending on your control
unit model, make different adjustments, and
modifications. Please refer to detail descriptions,
ALCATech remote control units, from chapter 6
on later in this manual, for this. Also refer to
program options, chapter 3.7.