ALCATECH BPM STUDIO 4 PRO User Manual page 129

Professional working with RCP-2001
Shifting of the end point by tacts
(Tact-Stepping):
Using the ring of Jog Shuttle Wheel, the end point
B can be moved in Edit mode by tacts (exactly 4
beats).
This means it is presupposed that the title is a 4/
4 tact. Also at a 2/4 tact, efficient results can be
reached, however not by titles with 3/4 or 6/8 tacts.
(1.) The Player is in Edit mode for the exit point
(B blinks).
Move the ring of Jog Shuttle Wheel to the right
stop.
Now, the point of exit is moved behind by exactly
4 Beats (= 1 tact in 4/4 tacting) (2.) and the Loop
has been extended by 4 beats consequently. You
can repeat it as many times as you wish or reduce
the Loop once more.
Press again on the still blinking B key to take over
changes.
You can also change the exit point equally by
pressing the B key in Edit mode or start Loop by
[EXIT/RELOOP] , for example for preliminary
listening. In every case, the edited point is taken
over.
It is necessary, to store the BPM value,
exactly determined by the Realtime BPM
Counter earlier,
combination: [MEMORY] + [SET] . It
decreases possible differences of the
positions in the title, where Beat cannot
be predetermined exactly.
using the key