Professional working with RCP-2001
8.1.7. Editing a Loop
Recorded Loop can be edited and changed using
the Loop Player. Therefore the Player has to be
in the Cue mode. Therefore press the Cue key
[4]. Now, all the three keys of the Loop Player
light in orange and Cue key shines in red:
Replacing of the start point (A):
Press the A key [6] now.
After that this key blinks and 160 ms after this
point will be played repeatedly as Loop. (This Cue
mode is equal as editing of the Cue points. See
also chapter "Beat matching using the BPM
Studio"). In the title display "MOVING-> A" will be
shown additionally and the exact time of the start
point. Now, you can move the point using the disc
of Jog Shuttle Wheel:
We recommend to store the BPM value, exactly determined by the Realtime BPM Counter
earlier, using the key combination: [MEMORY] + [SET] . It decreases possible differences of
those positions in the title, where Beat cannot be predetermined exactly.
8.1.8. Beat-Stepping
Hold the [LOAD] key [11] pressed and
additionally turn the disc of Jog Shuttle Wheel,
then you can move the A point exactly one tact
(per 4 beats).
Need help?
Do you have a question about the BPM STUDIO 4 PRO and is the answer not in the manual?