Recording Using Autoloop Function - ALCATECH BPM STUDIO 4 PRO User Manual

Professional working with RCP-2001
If you press the [EXIT/RELOOP] key, the sample
will be played up to the point B and then pass
seamless into the title again. In this time the
[EXIT/RELOOP] key and
Finally all the three keys (A, B and [EXIT/
RELOOP]) are lighting in orange.
The Loop can be played again any time by
pressing the [EXIT/RELOOP] key.
8.1.2. Recording using Auto-Loop
function:
It is a little problematical to fix the end point of a
Loop manually exactly at the first attempt. The
Auto-Loop function of the BPM Studio helps at
this, while it automatically record a tact exactly
and then switches into the Loop-Play mode. Use
the Auto-Loop function as follows:
The DirectCue information cannot be
loaded into the Player in the Autofade
Mode. Please do NOT use this mode if
you want to use stored DirectCue's.
Set a start point at any position by pressing the
A key. After that A key lights in orange.
Switch now to the Edit mode pressing the [CUE]
key ([CUE] key will light in red) and then the A
button. A key will start to blink. (This is usually
the Edit mode for the start point).
are blinking.
Press the B key. A Loop with exactly one tact (4
beats) is created automatically and played
instantly.