Rcp-2001 And Fader Start - ALCATECH BPM STUDIO 4 PRO User Manual

[34] Pitch Wheel
(only in RCP-2001-B)
Set the desired playback speed using the Pitch
Wheel. On the display [14] the actual speed in
BPM and the difference in percent appear. The
Wheel is only active if the [Pitch] key [24] is on
and the Pitch-LED [25] is shining.
[35] Pitch Reset
(only in RCP-2001-B)
You can put the Pitch to 0 using this key.
Reverse Side Sockets:
[36] Fade Start Input Socket
This socket usually works with all mixers that have
an available fade/start function, for example the
PIONEER series. Connect the plug (1/8 inch jack)
of the Remote Control Unit using a universal cable
to your mixer. Connect the ground device (GND
[36a]) with the ground of the mixer.
How it works:
Both players are controlled by a separated 1/8
inch stereo jack. The player starts by locking the
contact S1 (temporarily or constantly) and stops
when contact S2 is locked (temporarily or
constantly). Through program options you can
activate fade start and also stop the separate fade.
Do not set up the grip ground to the same as the
device ground! This will avoid a short circuit
between the device and the grip ground.
[36a] Device ground
Connect the device ground (GND) to the ground
of mixer.
RCP-2001 Description