ALCATECH BPM STUDIO 4 PRO User Manual page 119

RCP-2001 Description
[14e] BPM value indicator, here the display will
show BPM value taken from the ID3-Tag of the
loaded title or value of real time BPM Counter.
[14f] Displays Pitch value in percents.
[14g] Displays the Pitch mode type. According
to the chosen mode in the program panel, you
will see if the changes of speed will work with or
without change of the sound level (Master-
Tempo).
[14h] Displays the mode of Jog Wheel. Using the
Archive [16], [17] keys it is possible to switch
between operation modes of the Jog Wheels.
[Archive] indicates File Archive Mode, [P.List]
indicates the Playlist Archive Mode and the
[Search] Search Mode (standard operation
mode).
[14i] Bar indicator displays the current play
position
[14k] The title display shows the current loaded
title and the interpreter from ID3- Tag of the MP3
file. The display scrolls automatically when data
cannot be completely presented.
If you experience problems with the performance
of your system, title scrolling can also be turned
off in the program options of the Remote Control
Unit.
This display can be also used to show a lot of
supplementary information. In the archive mode
for example, the respective selected group,
Playlist or the title in archive will be displayed here
temporary.
[14l] Displays the four additional functions: Single-
/Continous-Play, Shuffle
Programming can be done using the [MODE] key
[20] and [SET] key [21].
[14m] Display for the Loop-Sampler
(not active in BPM Studio LE or RCP-1001)
[15] DirectCue keys 1 - 6
(Not active in the BPM Studio LE)
The Direct-Cue keys make it possible to store up
to 6 favourite positions in any title as Cue-Point
on-the-fly or optionally to save Loops recorded
with the Loop Player. Then, these points and
Loops can be started just by a single touch of the
DirectCue key. Stored Cue-Point will be indicated
by a key lightning in red. If a stored Loop is on
this key, then key color is changed into orange.
Read all about these keys in chapter "Working
with DirectCue keys" and "Working with the Loop
Player".
[16], [17] Archive button
Using the [ARCHIVE]-key [16] you can switch
the Jog Wheel [1], [2] into the File Archive Mode.
It is indicated additionally in the display by
to the Playlist Archive mode
the key again the Search mode will be switched
back
automatically as well, when any other key of the
Player is pressed or after 30 seconds, if you have
not moved the Jog Shuttle Wheel during this time).
[18] NEXT TRACK button
Using this function, you can "park" any next title
in waiting position during current reproduction of
a title. Then, it will be played automatically as next
title irrespective of current Playlist. Press NEXT
TRACK key. In the display [14] will be
displayed. Now, choose a title from current Playlist
by the TRACK SELECTOR [12]. (Chosen title is
shown in the display under
Optionnaly you can enlighten a title immediately
and then start NEXT TRACK also by pressing
TRACK-Selector.
and Repeat.
symbol. The [P.List] key [17] switches
(switching back takes place
. By pressing
).