ALCATECH BPM STUDIO 4 PRO User Manual page 118

[12] Track Selector
You can move inside the playlist using the Track
Selector. A full turn of the ring causes switching
24 titles down the list. If you navigate in really big
lists, then by pressing the Track Selector and
turning it at the same time, you can move by 10
steps at a time. By pressing the button chosen
title will be loaded into player.
[13] MEMORY button
(not active in the BPM Studio LE)
This key has vast functions to store and delete
different Cue-Points, Loop and other parameters.
Pressing this button switches the Player into
memory mode. It will be indicated while the key
lights in green. The memory mode will be
abandoned automatically after 10 seconds
without any entry.
1.) If the Player is in the Play mode, then pressing
[MEMORY] button, followed by DirectCue key
[15] will set Cue-Point "on-the-fly".
2.) If the Player is in the Pause mode, then
pressing [MEMORY] button, followed by
DirectCue key [15] will store current play position
as Cue-Point on this DirectCue key.
3.) If the Player is in the Loop Player mode, then
pressing [MEMORY] button, followed by
DirectCue key [15] will store current Loop on
DirectCue key.
4.) If the Player is in the Loop Player mode, then
pressing [MEMORY] button, followed by Sample
Player key will store current Loop on this Sample
Player key [28].
5.) Pressing on [MEMORY] button, followed by
[SET] -key [21] will take over BPM value
discovered by real time BPM-Counter into ID3-
Tag.
6.) Holding on [MEMORY] button and
simultaneously pressing DirectCue key will delete
Cue-Point or Loop of this key.
7.) Holding on [MEMORY] button and
simultaneously pressing key A of the Loop Player
[6] will delete stored Loop.
8.) Pressing on [MEMORY] button longer than 3
seconds will complete DirectCue keys and Loop
Player deleted.
You will find detailed description of these functions
in chapters "Working with DirectCue keys" and
"Working with Loop Player" of manual worker.
[14] The VFD display
In the VFD display, all the parameters and activity
modes of the respective Player will be shown as
follows:
[14a] Indicates the number of loaded Tracks
[14b] NEXT TRACK indicator.
(Not active by RCP-1001) Indicates the Titel
"parked" by the [NEXT TRACK] -button [18]
[14c] Displays the time. Playtime of the title is
shown in minutes, seconds and in tenth of
seconds. Time information can be switched over
by using the [TIME] key [19] between total title
play time (ELAPSED), remaining title play time
(REMAIN) and total remaining play time of the
playlist (TOTAL). If the Player is in Cue mode,
then the current Cue-Point will be shown.
[14d] Operation mode of the time display,
switchable by the [TIME]- key [19]
RCP-2001 Description