Thank you Infinity would like to take this opportunity to thank you for purchasing one of our products. In order that we may better serve you should you require warranty service, please retain your original purchase receipt. If you would like to register your...
Page 2
Remember that the • The 6100m Wakeboard Tower System is an professional. Although these instructions explain screws can extend behind the surface and all-in-one speaker system for your boat. The how to install the Wakeboard Tower System could puncture the boat’s hull.
Page 3
6000 OUNTING THE PEAKERS ONNECTING THE PEAKERS The 6000m speakers use a unique mounting SURFACE-MOUNTING SWIVELING THE SPEAKERS Connect the speakers to an amplifier using bracket that works with various tube sizes Some towers may have a flat support panel used Located at the base of the speaker mounting the supplied speaker wires.
Page 4
REMOTE terminal to the Speaker Wires (spliced) boat’s accessory circuit. NOTE: When using the Hi-level inputs, the Line Out on the 6100m can be used to pass a full-range line-level signal to another amplifier.
Page 5
Draw an “X” between the mounting screw (lights, steering, throttle control, etc.). ON – Turns the 6100m system ON; allows the PA locations. feature to be used without having to turn the Predrill the holes.
Page 6
PPLICATIONS Figure 12. 6100m System speaker-level connection. Figure 13. 6100m System line-level connection. Remote Remote Turn-On Turn-On LF Speaker RF Speaker Splices Splices Source Unit Source Unit (not supplied) (not supplied) L Speaker R Speaker LR Speaker RR Speaker...
Page 7
LR Speaker RR Speaker NOTE: If the 6100m is turned off using the Power switch, there is NOTE: Match the gain of the output of the two speaker sets so they perform at the same volume level. no signal pass-through on the LINE OUT connections.