Download Print this page

Harman Kardon HK195 Quick Manual

Speakers

Advertisement

Harman Kardon HK195 Speakers
USAGE GUIDELINES
Please read the following operating precautions before use:
To prevent the risk of electric shock, do not remove the cover (or back). There are no user-serviceable
parts inside this unit.
Use only the AC power adapter designed specifically for the HK195 speakers.
The AC power adapter receives power as long as it is connected to the electrical outlet, even if the
HK195 power switch is turned off. Always remove the AC power adapter from the electrical outlet
before inspecting the adapter.
When disconnecting the AC power adapter from an electrical outlet, grasp and pull the adapter, not the
cord.
If the HK195 speakers are not going to be used for a period of time, disconnect the AC power adapter
from the electrical outlet.
Always disconnect the AC power adapter from the electrical outlet before making any speaker
connections.
Place the HK195 speakers on a stable, level surface. Do not drop them, apply excessive force to the
controls, or put heavy items on top of them.
If the HK195 speakers require cleaning, use a soft cloth. If necessary, use a damp cloth, but no
solvents.
To protect the HK195 speakers, avoid microphone feedback, continuous output from electronic musical
instruments, or distorted output from any signal source.
If the HK195 speakers are placed near a fluorescent light source or neon light fixtures, a hum in the
speakers may be heard. Relocate the HK195 speakers farther from the fixtures to reduce or eliminate
the noise.
Although the HK195 speakers are magnetically shielded, keep magnetic media (discs and tapes) at
least 4 inches from them to avoid data loss.
SUBWOOFER OUTPUT JACK
Under a rubber plug, on the main (control) satellite, there is a line-level subwoofer output jack. Remove
the plug and insert a cable, mini-phono stereo (3.5mm) to whatever the input cable connection is on the
subwoofer, whether it's another mini-phono stereo jack, or dual RCA's.
The subwoofer output is a full-range signal, so it could be hooked up to a subwoofer or to another
external amplifier.
1

Advertisement

loading

Summary of Contents for Harman Kardon HK195

  • Page 1 When disconnecting the AC power adapter from an electrical outlet, grasp and pull the adapter, not the cord. • If the HK195 speakers are not going to be used for a period of time, disconnect the AC power adapter from the electrical outlet. •...
  • Page 2: To Connect The Speakers

    AC adapter into into the electrical outlet. NOTE: The subwoofer jack on the back of the right speaker can be used to connect the HK195 speakers to a powered subwoofer. No subwoofer is included with this system, and Dell does...
  • Page 3: Troubleshooting

    Harman Kardon HK195 Speakers (cont’d) Troubleshooting Problem Cause Solution Transformer not plugged in or not Verify that AC Power transformer is firmly seated firmly seated in an electrical outlet or power strip. Connected to a switched AC Verify that AC Power transformer is...
  • Page 4 Harman Kardon HK195 Speakers (cont’d) Sound contains too Incorrect setting for bass and Adjust bass and treble controls so that much treble or bass treble controls dot on knobs is at 12 o’clock position. Sound is distorted Input source too high...