Download Print this page

Oz Audio Vector User Manual

Class d high performance amplifier

Advertisement

Quick Links

1181 South Rogers Circle, Suite 18
Boca Raton, Florida 33487
e-mail info@jti-innovation.com
www.jti-innovation.com
05/06

Advertisement

loading

Summary of Contents for Oz Audio Vector

  • Page 1 1181 South Rogers Circle, Suite 18 Boca Raton, Florida 33487 e-mail info@jti-innovation.com www.jti-innovation.com 05/06...
  • Page 2: Specifications

    Specifications: Congratulations you have invested in Oz Audio’s Vector amplifier system! This amplifier system is the product of years of research and development to ensure that you receive Model: VA700.1 VA2000.1 the best overall performance that money can buy. This amplifier system exceeds all industry standards in performance and reliability to guarantee years of quality use.
  • Page 3: Amplifier Layout

    ��������������� Electrical Connections: ������� Oz Audio amplifier systems are designed to work within 11.5 to 16 volts DC. As a preven- tative measure it is highly recommended that the vehicle chosen for installation have its �������������� electrical system tested. First using your digital multi meter (set to DC voltage) connect the test leads to the battery terminals with the ignition in the off position and the vehicle ��...
  • Page 4: Power Connections

    Signal Inputs: excessive heat, etc…). IIn order to achieve the utmost clarity and output from your new Oz Audio amplifier sys 4. Be sure to solder all ring terminals to prevent loose or isolated connections. tem the signal path must be clean. The recommended signal cable would be in the form 5.
  • Page 5: Making The Connections

    ����� ����� �� ��� ��� With Vector class D amplifiers, you can “strap” two amplifiers together in a master/ ���������� slave configuration. This strapping will result in doubling your power. In this configu- ������� �������� ration, the master amplifier has total control over the slave amplifier. To strap two ����...
  • Page 6: Setting The Crossover

    First, with the gain at its lowest setting, turn on the vehicle, and the head unit. Using Included with your Vector amplifier system is a Remote Bass Control. This RBC allows a musical track that is dynamic and of good recording quality (no MP3’s please), turn you to have subwoofer control from the driver’s seat.

This manual is also suitable for:

Vector va700.1Vector va2000.1