Bowens EQUIPE HEAD Operating Instrctions

Bw-2850

Advertisement

Quick Links

EQUIPE HEAD
OPERATING INSTRUCTIONS
Covers Models
BW-2850

Advertisement

Table of Contents
loading

Summary of Contents for Bowens EQUIPE HEAD

  • Page 1 EQUIPE HEAD OPERATING INSTRUCTIONS Covers Models BW-2850...
  • Page 2 Figure 1 Rear Control Panel / Mounting Bracket Key To Figure 1 Modelling Lamp On/Off Switch Socket for Cable Plug Green Location Mark for Alignment of Plug with Socket Modelling Lamp Fuse Locking Handle Umbrella Mounting Hole Knurled Fixing Knob for Umbrella Mounting Bracket Figure 2 Cover Glass / ‘S’...
  • Page 3 Safety Notes - Please Read Before Operating Head Please read and follow these basic safety instructions: READ and UNDERSTAND the instructions and specifications. ONLY connect to an Equipe 1200 or 2400 Pack using the specified Flash Head cables. NEVER replace the fuse with that of a different type or rating. See Specification for correct value/type of fuse.
  • Page 4: General Features

    General Features The Equipe Head in conjunction with the Equipe 1200 & Equipe 2400 Packs have been designed to produce the most compact, versatile and easy to use flash source available today. The Equipe Head features include: Integral reflector. Up to 300 Watt maximum modelling power per Head.
  • Page 5: Circuit Protection

    Ensure that the Head has cooled sufficiently before removing the old modelling lamp from the holder. Ensure a replacement modelling lamp of the same voltage as the supply (230 V) is used. Do not touch the replacement modelling lamp with fingers: use clean, impervious cloth or paper, or the new lamp packaging materials.
  • Page 6 DIMENSIONS Length 8.2 inch 20.8 cm Diameter 3.5 inch 9.1 cm WEIGHT 1.8 lb - 0.8 kg Due to our policy of constant product improvement Bowens International Limited reserve the right to change equipment specifications without notice. - 6 -...
  • Page 7 Accessories A Special Adapter is available to allow fitting of the standard ‘S’ series reflectors and accessories as used on all the Bowens Prolites, Esprit, and Traveller Plus, Universal and ‘S’ type Quad Flash Heads. A Cover Glass Kit is available including coated glass to provide UV filtering, frosted glass to provide a diffused effect and also clear glass.
  • Page 8 EQUIPE HEAD INSTRUCTIONS BWL-0232/1 24-9-96 BOWENS INTERNATIONAL LIMITED 355 OLD ROAD CLACTON-ON-SEA ESSEX CO15 3RH ENGLAND Tel: +44(0)1255 422807 Fax: +44(0)1255 436342 - 8 -...

This manual is also suitable for:

Bw-2850

Table of Contents