Download Print this page

Electro-Voice N868 Specifications

Bass drum microphone

Advertisement

Quick Links

General Product Description
The N/D868 is truly a top performer in any application.
Whether in a live sound or studio environment, the N/D868
is able to handle incredibly high sound pressure levels
without distortion or overriding the input mixer.With a
response specifically designed to "kick" the N/D868 can be
used is "as is"—no additional EQ required. Electrovoice was
the first to utilize the neodymium magnet structure, and it
remains at the heart of our new N/DYM series of
microphones. Experience the leader again for the first time
and hear the difference.
• Designed specifically for kick drum applications in live or
studio environments
• Optimized sensitivity for the high sound pressure levels
found in bass drum micing
• Extended low-frequency response
• No additional EQ required
• Rugged steel construction for exceptional durability
Operation
The low frequency response of the N/D868 microphone
varies with the distance from the sound source. Known as
"proximity effect," maximum bass response is produced in
"close-up" use with the microphone 1/4 inch from the
sound source. Normal bass response is experienced with
working distances greater than 24 inches.Working close to
the microphone will produce a more robust sound. Close up
positioning of the microphone will also reduce the potential
for feedback from the sound reinforcement system.When,
the bass-boost provides an increase in overall microphone
output level.The mixer gain may be proportionately
reduced, resulting in a reduction of the system's sensitivity to
feedback caused by sound entering the microphone from
the loudspeakers.
Microphone Use and Placement
Please note that micing techniques are a matter of personal preference.
These are merely guidelines to assist in the placement of the microphone to gain optimal performance.
Usage
Optimal Placement
Kick Drum
Remove drum head and damp with a pillow or blanket. Position the mic on the pillow or blanket a few inches in front of the
drum beater. As an alternative, position the mic on a small boom stand with the mic extended into the drum and at a 90° angel
to the drum beater.
N/D868
Bass Drum Microphone
N / D Y M
®
W
I
R
E
D
MICROPHONES

Advertisement

loading

Summary of Contents for Electro-Voice N868

  • Page 1 N/D868 Bass Drum Microphone General Product Description N / D Y M ® The N/D868 is truly a top performer in any application. Whether in a live sound or studio environment, the N/D868 is able to handle incredibly high sound pressure levels MICROPHONES without distortion or overriding the input mixer.With a response specifically designed to “kick”...
  • Page 2: Specifications

    N/D868 Standard Placement & Use Guidelines 1. Always point the microphone at the desired source of Bass Drum Microphone sound, and away from any unwanted sources. 2.The microphone should be located close to the sound Specifications source to minimize interference from other potential sound sources.

This manual is also suitable for:

D868