Giant PreRunner Jog Stroller Owner's Manual

Giant PreRunner Jog Stroller
Owner's Manual
Assembly and Maintenance
PLEASE READ THE FOLLOWING BEFORE BEGINNING ASSEMBLY:
Before assembling your GIANT PreRunner Jog Stroller all of us at
GIANT strongly encourage you to read this manual. In return for the
time spent reading this manual and learning about your new GIANT
PreRunner Jog Stroller you will be rewarded with many hours of safe
usage.
WARNING! WE RECOMMEND THE USE OF A SAFETY HELMET
APPROVED BY THE CONSUMER PRODUCT SAFETY COMMISSION
(CPSC) FOR ANY CHILD USING THIS RIDE-ON TOY.
WARNINGS!
Avoid serious injury from falling or sliding out. Always secure
child in stroller using the safety harness as described.
Always wear an approved bicycle helmet.
Never leave a child unattended in this stroller.
Always use parking brake when the stroller is stationary.
A child may slip into the leg openings of the safety harness and
strangle unless they are properly secured. Never leave child in
this stroller unless they have been properly secured in the safety
harness.
Child must be old enough to sit upright unassisted.
Do not overload your stroller. Maximum load is 75lbs, including
passenger and cargo.
Make sure your child remains seated in the stroller at all times.
Use wrist safety straps all the times.
Be sure the stroller frame is completely unfolded with latching
mechanisms secure and wheels locked in the place, before
allowing children near the stroller.
Check that all buckles, snaps, straps and adjustments are secure
before each use.
Check and maintain tire air pressure as specified on the side of
tire.
Do not use your stroller with roller skates or in-line skates. An
accident could occur resulting in serious injury or death.
Insure the stability of the stroller by always carrying heavier items
in the lower cargo basket and lighter objects in the seat back
pocket.
Do not hang objects from the stroller. This could destabilize the
stroller.
Avoid hitting obstacles with wheels.
Read and understand entire owner's manual prior to use.
Keep children away from plastic packaging.
Assembly
Before assemble your Giant PreRunner Jog Stroller. Please check
that you have all the following parts:
Main Frame x 1
Foot Rest x 1
Front Wheel x 1
Bolts set for Footrest installation
Rear Wheels x 2
6mm hex key wrench
Handlebar & Stem x 1
MAINTENANCE:
Your GIANT PreRunner is a quality Jog Stroller. It has been
constructed utilizing quality components and fasteners. Contact
your local Authorized GIANT Retailer for replacement parts and
service. With periodic maintenance, common sense usage, and care
this Jog Stroller can provide many years of using enjoyment.
Periodically check all of the fasteners to insure that everything is
securely tightened. Check the handlebars to make sure that they
secure. Replace any broken or worn parts as necessary.