Flipping An Image; Cropping An Image - ACD Systems ACDSEE 12 User Manual

ACDSee 12 User Guide
3. Do one of the following:
Click Done to apply your changes and close the tool.
Click Cancel to discard all changes and close the tool.
Click Reset to clear your changes and reset to default settings. If you saved your changes, you cannot reset your settings.
Rotate icons
Horizontal Click on the horizontal icon, and then use the cursor to draw a line on the image that you want to set as the
horizontal line.
Vertical Click on the vertical icon, and then use the cursor to draw a line on the image that you want to set as the
vertical line.

Flipping an image

You can flip an image both vertically and horizontally in Edit.
To flip an image:
1. In Edit mode, in the Geometry group, click Flip.
2. Do one or both of the following:
Select the Horizontal Flip check box.
Select the Vertical Flip check box.
3. Do one of the following:
Click Done to apply your changes and close the tool.
Click Cancel to discard all changes and close the tool.
Click Reset to clear your changes and reset to default settings. If you saved your changes, you cannot reset your settings.

Cropping an image

You can use the Crop tool to remove unwanted parts of your images, or to reduce the image canvas to a particular size. You can save
your options as a preset for future use.
To crop an image:
1. In Edit mode, in the Geometry group, click Crop.
2. Resize the crop window, and position it over the area of the image you want to keep.
3. To darken the parts of the image outside the crop window, drag the Darken outside crop area slider to the left. Drag the
slider to the right to lighten the area outside the crop window.
4. Click Estimate new file size to view how big your image file is after cropping.
5. Do one of the following:
Click Done to crop the image and close the tool.
Click Cancel to exit the tool without cropping the image.
Resizing the crop window
You can resize the crop window in three ways:
Drag the edges of the crop window to the desired size.
Specify an exact size for the crop window in pixels, inches, centimeters, or millimeters.
Apply a ratio to constrain the crop window proportions.
142