Advertisement
Quick Links
"Protect Yourself And Your Investment"
OWNER'S MANUAL
MODEL: 200+P
COPYRIGHT: OMEGA RESEARCH & DEVELOPMENT 1999
Introduction
Congratulations on your purchase of this vehicle security system. In learning to
operate your security system, please become familiar with the following three principal
components: the Remote Transmitter, the Red LED Status Light, and the Valet Switch.
The Remote Transmitter:
Each security system comes with two pre-learned
transmitters, but can learn up to 4 different transmitters. The transmitter has two buttons:
one large button and a smaller button. This system is pre-programmed, through a built-in
learning routine, to have the transmitter buttons work in the following configuration:
The large button is used to arm, disarm and panic the security system.
The small button pressed for 2 seconds operates the optional trunk release feature.
Pressing the small button twice within two seconds will arm or disarm the system without
the siren chirp confirmation (silent arm/disarm). The small button can be used, in
conjunction with the large button, to operate remote sensor bypass.
Both buttons pressed together can be used to activate the 3rd Channel output or engage
the Anti-Carjacking feature, provided it is programmed to operate.
The Valet Switch:
This switch is used to prevent automatic system functions such
as Last Door Arming or Automatic Rearming by placing the system into Valet Mode. The
Valet Switch is also used, with the ignition key, to disarm the security system in the event
the transmitter becomes inoperable, and this switch is also used in the procedure for
programming features and transmitters.
Page - 3
Table Of Contents
The Remote Transmitter ............................................................................................................. 3
The Valet Switch ........................................................................................................................ 3
The Red LED Status Light ......................................................................................................... 4
Transmitter Operations ............................................................................................................... 4
Active Arming The Security System Using The Transmitter .................................................... 5
Arming Bypass ........................................................................................................................ 5-6
Auxiliary Sensor Bypass ............................................................................................................ 6
Passively Arming The Security System With The Last Door Arming Feature ...................... 6-7
Security System Armed And Activated .................................................................................. 8-9
Disarming The Security System ................................................................................................. 9
Safety Disarm/Storm Mode ...................................................................................................... 10
Automatic Rearming ................................................................................................................ 10
Remote Panic ............................................................................................................................ 11
The Valet Switch And Valet Modes ................................................................................... 11-12
Valet Override - Disarming The Security System Without The Transmitter .......................... 12
Red LED Status Light - Security System Status ................................................................. 13-15
Siren And Parking Light Confirmation ............................................................................... 15-16
Shock Detection And Prewarn Circuit ..................................................................................... 17
Trunk Release And 3rd Channel Output .................................................................................. 17
Programmable Features ....................................................................................................... 18-25
Total System Reset .............................................................................................................. 25-26
Encoding Transmitters ........................................................................................................ 26-27
Second Vehicle Operation ........................................................................................................ 27
Limited Lifetime Warranty ........................................................................................ Back Cover
The Red LED Status Light:
be in and also serves as a visual deterrent to break-ins and theft. Please spend time reviewing
this guide and to become familiar with your vehicle security system.
Transmitter Operations
LED Light- Illuminates when
the Transmitter is operating.
Large Transmitter Button-
Pressing and releasing this
button will arm and disarm
the alarm, which optionally
locks and unlocks the doors.
Pressing and holding this
button for 2 seconds will
"Panic" the alarm- sounding
the siren, flashing the exte-
rior lights.
Both The Large and Small
Transmitter Buttons- Pressing these buttons together for 3 seconds will engage the 3rd
Channel Output or the programmable Anti-Carjacking feature. Please see the sections
describing these features.
Informs you of the different conditions the system can
Small Transmitter Button-
Pressing this button alone for 2
seconds can be used to remotely
open the trunk. If this button is
pressed twice within 2 seconds
the system will arm or disarm
without the confirmation siren
chirps. If this button is pressed
within 5 seconds after arming
the system, the shock sensor, if
present, will be bypassed.
Page - 4
Advertisement
Summary of Contents for Freedom Freedom 200+p
-
Page 1: Table Of Contents
MODEL: 200+P Programmable Features ....................... 18-25 Total System Reset ......................25-26 Encoding Transmitters ......................26-27 COPYRIGHT: OMEGA RESEARCH & DEVELOPMENT 1999 Second Vehicle Operation ......................27 Limited Lifetime Warranty ..................Back Cover The Red LED Status Light: Informs you of the different conditions the system can Introduction be in and also serves as a visual deterrent to break-ins and theft. -
Page 2: Arming Bypass
protection will be reinstated for the affected circuit if its normal state is restored. For Arming The Security System example, if the trunk is left open, you can still arm the system normally from the transmitter. The bypassed circuit will automatically be reinstated for protection three seconds after that "Arming"... -
Page 3: Disarming The Security System
seconds. The LED Status Light will change to flashing one to five times between pauses, Safety Disarm/Storm Mode: While the system is activated, i.e. sounding the siren which indicates which protected zone triggered the system. The LED Status Light will and flashing the lights, pressing the large transmitter button will disarm the system only. -
Page 4: Siren And Parking Light Confirmation
5) 1 flash and pause = 1 transmitter code is stored in the system's memory. The Red LED Status Light 6) 2 flashes and pause = 2 transmitter codes are stored in the system's memory. 7) 3 flashes and pause = 3 transmitter codes are stored in the system's memory. The LED Status Light is used as a visual indicator of the different states that the 8) 4 flashes and pause = 4 transmitter codes are stored in the system's memory. -
Page 5: Shock Detection And Prewarn Circuit
Shock Detection And Prewarn Circuit Programmable Features This system allows the easy addition of an auxiliary sensor which will activate the system The FREEDOM-200+P security system has 16 Programmable Features, that may be if a shock or impact to the vehicle is detected. Your system is equipped with a Prewarning easily changed through the Features Programming Mode. - Page 6 expires, the countdown stops, and will reset to start again when the door is reclosed. When 6) Doors Lock With Automatic Rearming: (Default OFF) If the previous Feature is programming, at Step #5 in Features Programming Mode press the transmitter's large button turned on, this Feature determines whether the doors will also lock when the security system to turn this Feature on or press the small button to turn this Feature off.
-
Page 7: Total System Reset
Company proves to be defective, the Company will repair or replace it free of charge within the first year and thereafter all parts to be repaired will be free with only a nominal charge for Omega Research and 4) To program the second, third or fourth transmitter codes, repeat step 3. As each Development, Inc.'s labor and return shipping, to the original owner during the lifetime of the car in which...