Philips Selecon Aurora Operation Manual

AURORA 1000W range
CYC, FLOOD & GROUNDROW
OPERATION MANUAL
THANK YOU FOR PURCHASING A SELECON AURORA FIXTURE. WE HAVE DESIGNED THIS FIXTURE TO PROVIDE
YOU WITH A SUPERIOR FITTING IN PERFORMANCE DESIGN AND ENGINEERING. WE ARE CONFIDENT THAT IT
WILL PERFORM TO YOUR EXPECTATIONS FOR MANY YEARS TO COME.
Below is information to assist you in making maximum use of your fixture, its maintenance and care. If you would
like further assistance contact your Selecon dealer or Selecon.
PLEASE NOTE: The Philips Selecon Cyc and Flood ranges are high performance entertainment fixtures designed
for entertainment and studio applications, they are not designed for continuous use as required for a work light
or rehearsal light. For these applications please use the Philips Selecon Hui Work Light.
SAFETY – MAINS POWER ISOLATION
The Aurora range is fitted with two micro-switches for each compartment, which automatically disconnect the
mains power when the color cassette is opened.
MOUNTING YOUR FIXTURE
A variety of mounting options is available for your Aurora fixture. Theatrical style hook clamps or TV style barrel
clamps are available from your Philips Selecon distributor.
A safety chain (Order Code: 20SC) MUST always be used when rigging fixtures on bars, ladders etc. The safety
chain is passed through the fixture anchor point hole located at the rear of the fixture and around the bar. Be
careful to allow sufficient slack to allow the fixture to be focused freely. Philips Selecon supply a safety chain
with all theatrical / entertainment fixtures.
The fixture should be at least 3ft away from the nearest object it is lighting.
LAMPS
Use only standard FFT type 1000W double-ended linear lamps.
To re-lamp, undo the latch at the top of the fixture and swing the color cassette forward. Carefully remove the old
lamp, and replace it with the new one. Take care not to touch the glass itself as the oil from your fingerprints can
cause premature lamp failure. After replacing the lamp, fold up the color cassette and latch it to the fixture body.
Version 4: June 2010 © 2008 Philips Selecon All Rights Reserved