Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Boss Audio Systems MR637U
Summary of Contents for Boss Audio Systems MR637U
-
Page 2: Wires Connection
WIRES CONNECTION Preface Thank you for purchasing this car audio product. ANTENNA JACK Please read this manual carefully before operating this car audio product. Please keep this manual for future use. It will be helpful to you if you are encounter any operational problem. -
Page 3: Troubleshooting
LOCATION AND FUNCTION OF CONTROLS TROUBLE SHOOTING Before using the check list please make all the connections first. If you still have questions after going through the checklist, please consult your local customer service representative. Common Symptoms Cause Solution If the power supply is properly connected to FL A SH The car ignition is switched off. -
Page 4: Power On/Off & Mute
BEEP ON/BEEP OFF CARE FOR USING CD'S: BEEP ON mode: The beep is generated when any key is pressed. BEEP OFF mode: The beep sound is disabled. About CD-R/CD-R/W discs: VOL LAST/VOL DEFA In addition to commercially-recorded audio CD's, this unit can play CD-R and VOL LAST: The radio switches on at the actual volume it had when it was last CD-R/W discs. -
Page 5: Installation Method
2) Press the INT button to sample the first 10 seconds part of each track, and the INT ON will be visible on the LCD display. INSTALLATION METHOD In the process of INT, pressINT button again to stop sampling and to continue playing the current track, and the LCD will display INT OFF. -
Page 6: Maintenance Of Remote Control
MAINTENANCE OF REMOTE CONTROL 2) when press briefly, the radio searches for each preset station in the current band and holds at that preset number for 5 seconds with releasing mute, and An insulation tag was installed in your remote by the manufacturer to prevent the then search again. -
Page 7: Operation Of Remote Control
OPERATION OF REMOTE CONTROL 18. RELEASE BUTTON Press the REL button to release the front control panel from the unit chassis, then pull it up a little to remove from the unit chassis. 1. Power On/Off. When the front control panel is removed the LED indicator flashes. 2.