Related Manuals for Tech 21 Power Engine 60
Summary of Contents for Tech 21 Power Engine 60
-
Page 2: Important Safety Instructions
Notes” #1: Powering Up and Powering Down.) with a clean, lint-free cloth to remove dirt and film. 3. Be sure the volume of the Power Engine 60 is turned down. Attach the AC cord, plug 11. Only use attachments/accessories specified by the manufacturer. - Page 3 (We happen to be partial to our own SansAmp line of direct recording pre-amps, of With a full line of SansAmp models, Tech 21 also offers effect pedals and course, but that’s just us.) MIDI products, as well as “traditional” style amplifiers for guitar and bass.
-
Page 4: Tone Section
If you would like to plug your guitar directly into the Power Engine Adjusts the volume level of the Power Engine 60. Be sure to set the Level control to 60, either use an active guitar or any buffered type of effect pedal (Boss ® , Ibanez ® , match (approx.) the output volume of the unit/amp into which it is plugged. - Page 5 46 lbs. (b) When using the Power Engine 60 with a Tech 21 Trademark combo amp, the Power Engine 60 Level control will most likely yield the best results when at max, Optional Accessories: even when the Trademark is at lower levels.
- Page 6 Power Engine 60 Hook-Up Diagrams (MONO) Power Engine 60 Hook-Up Diagrams (STEREO) PRE-AMP/ STEREO EFFECTS PROCESSOR PROCESSOR INPUT When available, it is preferable TO CHAIN OR TO P.A. to use XLR jacks TO CHAIN TO CHAIN SANSAMP XLR OR TO P.A.