Magellan 980824 - Universal Floor Mount Manual

MM325 | Seat Bolt or Floor Mount for Magellan®, Mio®, and Navman® GPS
CM088-TS-2
15" Flexible Floor Mount
1 Passenger Seat Bolt Mounting
For a simple mount that can be easily moved to another vehicle,
install using the passenger seat track bolt.
Step 1. Screw the fl exible steel shaft into the seat track bolt bracket.
Step 2. With a socket wrench, loosen the passenger seat track bolt,
insert the seat track bolt bracket, and retighten the seat
track bolt.
2
Floor or Console Mounting
For a more permanent mount, connect the Floor / Console Mount
Bracket to the fl oor or console. This will require drilling into your
vehicle's interior surface.
Drilling into the dash, fl oor, or console will permanently damage the
!
vehicle. Use caution and consult a mobile install professional to avoid
drilling into the gas tank, electrical system or other highly sensitive
vehicle components.
All brand names and product names are trademarks or registered trademarks of their
respective owners.
!
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
APMM300
Dual-T Pattern
Adapter Plate
Patent Pending
Continued on next column...
Package Contents:
(1) CM088-TS-2 - 15" Flexible steel gooseneck fl oor or console mount
Includes: (1) Seat Bolt Bracket, (1) Floor / Console Bracket, (4) Screws,
(4) Plastic Caps, and (1) Flexible Steel Shaft with Plastic Tubing
(1) APMM300 - Dual-T pattern adapter plate
Required Tools for Installation:
1. Socket wrench
2. Drill and screwdriver for optional fl oor or console mounting
Compatible with:
• Magellan Maestro: 3100, 3140, 3200, 3210, 3220, 3225, 3250, 4000, 4010, 4040, 4050,
4210, 4215, 4200, 4220, 4245, 4250, 4350, 4370, 4700, 5310, and 5340
• Magellan RoadMate: 1200, 1210, 1212, 1215, 1220, 1230, 1340, 1400, 1412, 1430, 1440,
1470, 1475T, 2000, 2200T, 2250T, 300, 3000T, 3050T, 360, 500, 500 Plus, 6000T, 700, 760,
800, and 860T
• Magellan Triton: 1500, 200, 2000, 300, 400, and 500
• Magellan Crossover: GPS 2500T
• Mio Moov: 300, 301, 310, 330, 330 Europe, 360, 370 Europe, 380, 500, and Knight Rider Ed.
• Navman: S50, S50 3D, S70, S90i
Do not place mount in or near an air bag deployment zone
!
or where it will obstruct view of the road.
Step 1. Position the Floor / Console Bracket and drill into the fl oor
or console.
Step 2. Attach the Floor / Console Bracket with screws and cover
with plastic caps.
Step 3. Screw the steel shaft into the Floor / Console Bracket.
3
Pedestal Head Adjustments
Adjust the steel shaft by bending with both hands to the
Step 1.
desired location of the male dual T head.
Use the adjustment knob and wing nut on the pedestal
Step 2.
head to swivel or rotate the head position if necessary.
®
The Mobile Mounting Specialists™
Consumer Hotline:
USA (800) 841-0884
INT'L (626) 254-9005
Monday - Friday 9 am - 5 pm, PST
Console Mount
Floor Mount
Continued on other side...
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China and Taiwan
© Copyright 2009 Arkon Resources, Inc.