Page 1
Installation Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-845-4641 or visit the Viking Website at vikingrange.com 324 Series Built-In Dishwashers (060113) F21217 EN...
Table of Contents IMPORTANT – Please Read and Follow • Before beginning–please read these • Please ensure that this product is properly Warnings & Important Information _____________________________________________________3 instructions completely and carefully. grounded. Dimensions & Cutout Dimensions _____________________________________________________6 Specifications _______________________________________________________________________7 • DO NOT remove permanently affixed •...
Page 3
• DO NOT use an extension cord. or moisture. • Viking Range will NOT warranty any • Failure to follow these instructions, can W A R N I N G problems resulting from GFI outlets which result in death, fire or electrical shock.
General Information Electrical Connections • Read these instructions carefully and • For service convenience, a shut-off valve Grounding Instructions 4. Care should be exercised, when the completely before installing the (not supplied) should be installed in the appliance is installed or removed to dishwasher.
Hardwire Conduit Option Hardwire Conduit Option (cont.) Green (Ground) Remove any loose items in the dishwasher and carefully Connect ground wire. Tighten screws on strain relief. Run wire through grommet on bottom pan. Remove bottom pan. Note: Rapid removal of the bottom pan will Note: Reinstall front plate.
Counter Balance Spring Adjustment Installation (if necessary) Disconnect cable from hook. Remove spring from dishwasher. Carefully lay dishwasher on its back and attach the kick To adjust the depth of the kick plate, loosen screws on plate brackets. Screws for the brackets will already be the bracket and position in the required depth.
Final Installation Leveling Equal distance 1.0” (2.5 cm) Cut here for 5/8” (1.6 cm) DOWN Cut here for 3/4” (1.9 cm) To check level, front to back, pull the top rack half-way out of (Discharge with food waste disposer) Place a level on handle, then adjust to appropriate Identify discharge connection size;...
Final Installation (cont.) Performance Checklist Testing for Leaks Unit Reset A qualified installer should carry out the following • If the unit should need to be reset for any checks: reason, push and hold the “START” button for 4 seconds. □...
All servicing should be referred to a qualified technician. Contact Viking Range, 1-888-845-4641, for the nearest service parts distributor in your area or write to: VIKING RANGE, LLC...