Download Print this page

Zeon IN1614 CALIBRE 520 Operation Manual

Automatic watches

Advertisement

Quick Links

Calibre 520
Automatic Movement Operation Manual
Automatic watches can be used only by those who are reasonably active as the automatic
winding relies on a regular movement of the wrist. The watch must be given an initial manual
wind of 8 to 10 turns and provided that it is worn on the wrist for a minimum of 8 hours each
day it will continue to function indefinitely and may be taken off the wrist for a maximum period
of 30 hours. If this period is exceeded the movement will stop and another manual wind will be
necessary. It must be remembered that when worn in bed the movement of the wrist is
insufficient to operate the automatic winding.
Time Stand Accuracy
1)
21,600 beats per hours
2)
Accuracy between -30 to +30 seconds per day worn under normal conditions.
Page 1
Instructions for Time Setting
1)
Unscrew the crown and pull the crown out to second position and turn the crown
anti-clockwise until the day of the week is correct. The day and date will now be
corrected, now set the time but make sure the time is set onto am or pm.
2)
The 12/24 hour dial will indicate AM or PM.
3)
Finally push and screw both the crown and buttons into Normal Position.
Page 4
Water Resistance Table
Level of
Suitable for
Can
Suitable for
Suitable for
Water
Everyday
withstand
Swimming
Pool Size
Resistance
use
accidental
splashing
None
Yes
No
No
No
3 ATM
Yes
Yes
No
No
(30m/
100ft
5 ATM
Yes
Yes
Yes
Yes
(50m/
150ft)
10 ATM
Yes
Yes
Yes
Yes
(100m/
300 ft)
Water resistance is not permanent. In the course of time, the gaskets of the case and
crown may become worn and reduce the water resistance of your watch. We recommend
the periodic checking
Normal Crown – always make sure it is pushed fully into case
Screw down Crown – tighten screw down crown completely to screw lock position.
To maintain water –resistance crystal, crown and case must remain intact
Exposure to Salt Water
If your watch is designed for sports or working in the water and it becomes exposed to salt
water or significant amounts of perspiration, it should be rinsed in fresh water and dried
thoroughly with a soft dry cloth.
Important
Buttons must not be operated while in contact with water
Page 2
Calibre 520
IN1614
Page 5
Functions
-
Hours
Suitable
Suitable for
for
high board
-
Minutes
snorkelling
diving or sub-
or water
aqua diving
-
Seconds
sports
-
Day of the week dial
-
Date
No
No
-
Month Dial
No
No
-
24 hours dial
-
Water Resistance – Check the back of the watch and refer to the Table.
No
No
Important
Yes
No
• Do not set the day & date between 06.00 PM and 06.00 AM, as this may cause
damage to the movement.
• At the end of the each month the date is required to be changed manually.
Instructions for Day, Date & Month Setting
1)
To achieve an accurate date of the week setting, unscrew the crown and pull the
crown out to first position and turn the crown clockwise until a date prior to the
date you require is achieved i.e. if today is 16
2)
Unscrew button A and press until day prior to the day you required is achieved.
i.e. if today is Wednesday then set it onto Tuesday.
3)
Unscrew button B and press until correct month is achieved.
4)
Finally push and screw crown back to normal position.
th
th
then set it onto the 15
.
Page 3

Advertisement

loading

This manual is also suitable for:

Calibre 520