Advertisement
Quick Links
Calibre 617
Automatic Movement Operation Manual
Automatic watches can be used only by those who are reasonably active as the automatic
winding relies on a regular movement of the wrist. The watch must be given an initial manual
wind of 8 to 10 turns and provided that it is worn on the wrist for a minimum of 8 hours each
day it will continue to function indefinitely and may be taken off the wrist for a maximum period
of 30 hours. If this period is exceeded the movement will stop and another manual wind will be
necessary. It must be remembered that when worn in bed the movement of the wrist is
insufficient to operate the automatic winding.
Time Stand Accuracy
1)
21,600 beats per hours
2)
Accuracy between -30 to +30 seconds per day worn under normal conditions.
Butterfly Strap Adjusting Instruction
Firstly, open the butterfly buckle and then pull out the pin. Adjust the strap to the required
length, and then push back the pin into the correct hole. Finally, close the butterfly buckle until
it clicks into place.
Page 1
Instructions for setting Moon Phase Display
Important
It is advisable the Moon Phase is set according to the dates mention on a table. I.e.
nd
February 02
2007 full moon is situated in the centre of the dial.
1)
To achieve an accurate moon phase setting, by using a pointed device, press
button B until full moon is situated in the centre of a dial.
2)
Now set the correct full moon phase date for the desired month.
3)
Finally to set the correct date and time pull the crown out to first position until the
correct date and time is shown making sure the time set to AM or PM
4)
Finally push crown back to Normal Position
Full Moon Dates
2007
2008
Jan
03
22
Feb
02
21
Mar
04
21
Apr
02
20
May
02
20
Jun
01/30
18
Jul
30
18
Aug
28
16
Sep
26
15
Oct
26
14
Nov
24
13
Dec
24
12
Page 4
Water Resistance Table
Level of
Suitable for
Water
Everyday
Resistance
use
None
Yes
3 ATM
Yes
(30m/
100ft
5 ATM
Yes
(50m/
150ft)
10 ATM
Yes
(100m/
300 ft)
Water resistance is not permanent. In the course of time, the gaskets of the case and
crown may become worn and reduce the water resistance of your watch. We recommend
the periodic checking
Normal Crown – always make sure it is pushed fully into case
Screw down Crown – tighten screw down crown completely to screw lock position.
To maintain water –resistance crystal, crown and case must remain intact
Exposure to Salt Water
If your watch is designed for sports or working in the water and it becomes exposed to salt
water or significant amounts of perspiration, it should be rinsed in fresh water and dried
thoroughly with a soft dry cloth.
Important
Buttons must not be operated while in contact with water
2009
2010
11
30
09
28
11
30
09
28
09
27
07
26
07
26
06
24
04
23
04
23
02
21
02/31
21
Can
Suitable for
Suitable for
Suitable
Suitable for
withstand
Swimming
Pool Size
for
high board
accidental
snorkelling
diving or sub-
splashing
or water
aqua diving
sports
No
No
No
No
No
Yes
No
No
No
No
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
No
Page 2
Calibre 617
IN7801
Page 5
Functions
-
Hours
-
Minutes
-
Seconds
-
Date of the Month
-
Moon Phase Dial
-
Water Resistance – Check the back of the watch and refer to the Table.
-
Instructions for setting Date and Time
1)
To achieve an accurate date setting, by using a pointed device, press button A
until a date prior to the date you required is achieved. I.e. if today is 16
th
it onto 15
.
2)
Once date is set to prior to the date you require, pull crown out to First Position
and turn the crown anti-clockwise until the correct date is achieved. The date will
now be corrected. Now set the time making sure the time is set in accordance
with AM or PM.
If the date is set between 10:00 PM and 02:00 AM, the date will not change
correctly.
The day and date is changed during the period from about 10:00AM to about
02:00AM.
Page 3
th
then set
Advertisement
