BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Follow the steps to record TV programs.
Note
• When playback of a recorded program is blocked by
the V-chip setting, "PROTECTED PROGRAM by **"
appears (** may vary depending on the rating). In
such case, check the V-chip setting. (Please refer to
page 110 for more details.)
44
EN
EN
If you are recording to the HDD, press [HDD] first, then
proceed to step 2.
If you are recording to a disc, press [DVD] first.
1
Insert a recordable disc (refer to page
27 on how to insert a disc).
* Make sure the disc is compatible with this unit.
(Refer to page 41 for the list of compatible discs.)
It may take a while to load
the disc data after the disc tray closes.
• When inserting a brand-new DVD+RW/DVD-
RW, the unit automatically starts to format.
( Except when HDD is recording, or when there
is a timer program which starts in 15 minutes.)
• If titles have been recorded on the disc, the
title list is displayed. Press [STOP C] to exit the
title list.
2
Press [REC MODE] repeatedly to
select a recording mode.
Refer to "Recording Mode" on page 42.
DVD SP(2Hr)
3
Select the appropriate external input
channel by pressing [SOURCE] or
[CHANNEL
/ ].
Press [DTV/TV] to select Analog TV or
Digital TV, then use [CHANNEL
or [the Number buttons] and [ • ] (for
Digital TV channels) to select a
desired channel to record.
Refer to "Switching Analog Mode/Digital Mode"
and "Channel Selection" on page 35.
Instructions continue on the next page.
Align the disc to
the disc tray guide.
0h58m
/ ]
CH 12
Need help?
Do you have a question about the MDR533H and is the answer not in the manual?