IMPORTANT: Please read your User’s Guide before using your system INTRODUCTION Your ROCK speaker is designed with a 900 MHz wireless speaker system using the latest wireless technology to enjoy audio anywhere inside or outside your home. Simply connect the desired audio source (Radio, TV, VCR, Hi-Fi and CD/MP3/VCD/DVD player) to the ROCK speaker transmitter.
FEATURES Automatic PLL (Phases Lock Loop) scanning system on speaker receivers. PLL (Phase Lock Loop) transmitter transmission system. 900 MHz RF (Radio Frequency) technology Weather-proof rock-style outdoor / indoor speaker system RF technology lets you place the rock speaker freely anywhere in your garden Operate up to 150 feet No line of sight limitation Auto ON/OFF control on transmitter...
Page 4
SET UP TRANSMITTER 1. Connect the AC power adaptor included with your unit to electrical wall outlet. 2. Plug the AC power adaptor included with your unit in the jack located on the rear of the transmitter. Option 4 X “AA” size ALKALINE batteries can be used to power the transmitter.
SPEAKER (RECEIVER) 1. Plug the power adapter into the rock speaker and connect to a power outlet. The built-in battery will power the speaker without being connected to a power adapter. The battery pack must be charged at least 12 hours before the first operation.
Page 6
5. Should experience frequency perceived reception/transmission, scroll the available frequencies. To do this, switch between Channels 1 and 2 on the transmitter and press the “AUTO-TUNE” button on the Rock speaker. 6. ‘Switching Off’ a) For protection of the transmitter and power saving, the transmitter will cut off automatically if there is no/weak operation input signal from audio source for approximately 4 minutes.
This device must be used with the AC/DC adaptor supplied in the package. CUSTOMER SERVICE & SUPPORT For questions regarding your system or any other Grace Digital product,visit us a www.gracedigitalaudio.com or contact us at: info@gracedigitalaudio.com 04_2010...