Page 1
. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
Check hydraulic oil level and fill to 1/4" below the fill port as needed. Thoroughly test the Jack for proper operation. If it does not work properly, bleed air from its hydraulic system as stated on page 2. SKU 68783 For technical questions, please call 1-800-444-3353 Page: 1...
4. Insert the Handle into the Handle Socket. Pump the Handle (Fig. 1) up and down quickly for several times to purge the air from the system. 5. Tighten the Oil Fill Screw (Fig. 2). SKU 68783 For technical questions, please call 1-800-444-3353 Page: 2...
Page 4
Reinstall the Oil Filler Plug. 4. Wipe dry with a clean cloth. Then, store the Jack in a safe, dry location out of reach of children and other non-authorized people. SKU 68783 For technical questions, please call 1-800-444-3353 Page: 3...
Check the oil level and refill if needed. Jack may require bleeding - see instructions on page 2. Unit may have too much hydraulic oil inside, check fluid level and adjust if needed. SKU 68783 For technical questions, please call 1-800-444-3353 Page: 4...
If our inspection verifies the Harbor Freight Tools Co. makes every effort to assure that defect, we will either repair or replace the product at our its products meet high quality and durability standards, and...