Download Print this page

AETNA ENGINEERING 8402 Specifications

Tachometer, sender, trim ring

Advertisement

Quick Links

PREMIUM QUALITY FOR UNEXCELLED RELIABILITY
The tachometer measures one of the most important operating parameters of an
engine - RPM. Your engine represents a substantial investment.
Protect it with
quality instrumentation.
Only top quality "mil-spec" workmanship and premium grade materials are used. This includes moisture
proof glass/epoxy circuit boards with double thickness copper and extremely high intensity readouts
manufactured by Hewlett Packard. The non-magnetic construction uses only brass, stainless steel, and
passivated aluminum hardware. The gasketed glass to metal seal is impervious to moisture.
Easy to install on gasoline or diesel engines. Just three wires connect. Self-contained unit easily replaces
existing standard-size tachometers. Choice of either polished stainless steel or black anodized aluminum
bezel.
31/8.
~
Sender Model 8901
For Diesel Engines
Tachometer Model 8402
LED Readout
Trim Ring
Available for optional use
with Black Bezel Tachometer
TACHOMETER SPECIFICATIONS
Tachometer range
0 to 9999 Revolutions Per Minute
Tachometer resolution
One Revolution Per Minute
Tachometer accuracy
Within plus or minus 1 revolution
Tachometer readout type
Four fully active LED digits
Tachometer display intensity
Automatic night dimming
Data update rate
Approximately once per second
Ratio settings: switch selectable
(other ratios by special order)
Gasoline engines
3,4,6,8,12,16
cycles (4 cycle)
Direct driven alternators
3,4,6,8,
12, 16 poles
Diesel
2, 3,4,6,8,12,16
pulses/rev.
Diesel sender output
Eight pulses per sender revolution
Diesel sender drive ratios
0.25:1, 2.0:1, 0.75:1,1.0:1
Diesel sender fittings
SAE Marine 7/8-18 mount, 0.187 tip
Nominal input voltage
13.6 volts DC
Input voltage range
6.8 to 16.0 volts DC
Power consumption (@13.6 VDC)
Bright Ambient
350 mA typical, 480 mA maximum
Dark Ambient
10 mA typical
Operating temperature range
-40 C to +85 C (-40 F to +185 F)
Storage temperature range
-60 C to +85 C (-76 F to +185 F)
Operating humidity range
0 to 95% R.H., non-condensing
Package construction
Passivated aluminum, non-magnetic
Interconnection terminals
Brass studs (3), #8x32
Warranty, limited
Two years
Specifications
subject to change without notice.
.
.., ,
,
)
I
(E
AETNA ENGINEERING
0-379 Lake Michigan Dr. NW, Grand Rapids, MI 49544 USA
Toll Free: 1-800-776-7962 Phone: 231-223-9867 Fax: 231-223-9467
Email: aetnaengineering@fireboy-xintex.com Web: www.fireboy-xintex.com
REV. 12/04
17008

Advertisement

loading

This manual is also suitable for:

8901