Download Print this page

Knoll WHD3 Installation Instructions

Hdmi no-wire system

Advertisement

Quick Links

Models and Dimensions
WHD3-HDMI TRANSMITTER
6-1/8" X 3-3/4" X 7/8" HIGH (156 X 95 X 22 mm)
WHD3-HDMI RECEIVER
6-1/8" X 3-3/4" X 7/8" HIGH (156 X 95 X 22 mm)
Power:
5 VDC 2.2 amps on each transmit and receive.
Warranty:
Knoll Systems warrants its products sold in the USA and Canada by authorized
Knoll dealers to be free of defects in materials and workmanship. This warranty
extends for three full years from the date of purchase by the original consumer.
Any products returned to Knoll Systems and found to be defective by Knoll
Systems within the warranty period will be repaired or replaced at Knoll Systems
option, at no charge. Knoll Systems will not be responsible for the actual cost of
installation or removal of the product, nor for any incidental or consequential
damages. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation may not apply to you. This
warranty gives you specific legal rights. You may have additional legal rights
that vary from state to state.
Knoll Systems
www.knollsystems.com
145 Tyee Drive Point Roberts, WA 98281
14-7163 Vantage Way, Delta BC V4G 1N1
Tel. (604) 940-1689, fax (855) 734-3363
Made in China
Knoll Systems All Rights Reserved
WHD3
HDMI NO-WIRE SYSTEM
Installation Instructions
v1.1
Warning: To be installed and/or used in accordance with
appropriate electrical codes and regulations. If you are not sure
about any part of these instructions, consult a qualified
electrician.
Introduction: Thank you for your purchase of a Knoll WHD3
No-Wire HDMI system. This system will take a HDMI signal and
transmit it to its receiver, which can be up to 20 meters (about
65 feet) away in ideal conditions, even through walls.
Please note that this wireless system may not work as described
in certain environments that have high electro-magnetic
interference at times. Suitability for use should always be tested
whenever possible.
Features:
Working frequency
range: 5.1 to 5.9 GHz
Supports video
resolution: 480p,
576p, 720p and
1,080p
Supports HDMI® video audio format and HDCP 1.2 with
video encryption
Supporting link speeds: up to 2.5 Gbps per channel
Certification: 802.11a/n
Omni-directional antennas
Up to 20 meters transmit distance with ultra low latency
Infrared remote control pass through
Signal Strength meter to maximize transmission strength

Advertisement

loading

Summary of Contents for Knoll WHD3

  • Page 1 Systems within the warranty period will be repaired or replaced at Knoll Systems option, at no charge. Knoll Systems will not be responsible for the actual cost of installation or removal of the product, nor for any incidental or consequential ...
  • Page 2 On screen there is a signal strength with a signal that has HDCP encoding present. indicator. The infrared receiver is on the side of the WHD3 Receiver and infrared signals can only go from the Receiver to the Transmitter.

This manual is also suitable for:

Whd3-hdmi