Page 2
If parts are missing or the 8. The common cause of overheating is deposits of appliance has been damaged, contact the Goldair dust or fluff in and around the Panel Heater. Customer Services Team. Ensure these deposits are removed by unplugging...
Page 3
Wall Mounting Position Instructions NOTE: Your ecosave Glass Panel Heater should be installed with at least 300mm clearance from the floor and any other surrounding parts including other appliances, walls, ceilings, shelves and soft furnishings. 300mm 300mm 300mm 300mm CONTENTS 1 x ecosave Glass Panel Heater 1 x Wall Mounting Accessories Pack: - 3 x plastic rail fittings...
Page 4
Wall Mounting Position Instructions Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. You only need to mount the heater at 3 points, 2 at the top and 1 at the bottom (on either the left or the right).
Service outside of the warranty period will installation of the product. Normal wear and be at your cost. tear is expressly excluded. Consumers Guarantee Act (1993). If your Goldair product fails to operate accordance with above satisfactorily, please return it to the retailer...