4.6 amp 15 inch cuting path/.065 in, line electric weedwacker (20 pages)
Summary of Contents for Craftsman WEEDWACKER 358.799270
Page 1
Operator's Manual CRRFTSMRN 4.5 Amp 14 Inch Cutting Path/.065 In. Line ELECTRIC WEEDWACKER ® Model No. 358.799270 • % Read and foi[o_; all Safety R ules and Operating WARNING: Instructions before first use of this product. For answers to your quest!ons about this product: Call 7 am-7 pm, Mon-Sat, 10 am--7 pm, Sun •...
FULL ONE YEAR WARRANTY ON CRAFTSMAN ELECTRIC WEEDWACKER ® LINE TRIMMER If this Craftsman Electdc Weedwacker ® Line Tdmmer fails to perform propedy due to a defect in material or workmanship within (1) one year from the date of purchase, Sears will repair or replace it, free of charge.
Page 3
sleeves, boots, and gloves. Do not must be marked with suffix "W-A" (in go barefoot or wear sandals. Canada "W'). Make sure your exten- • Secure hair above shoulder length. sion cord is in good condition. Secure or remove loose clothing and spect extension cord before use and jewelry or clothing with loosely ha0g- replace if damaged.
TRANSPORTING • Use specified trimmer spool. Make STORAGE sure spool is propedy installed and all parts are securely fastened. • Stop the unit and disconnect the • Use only recommended replacement power source when not in use. parts and accessodes. •...
Page 5
ATTACHING THE SHIELD CARTON CONTENTS Check carton contents_againSt the fol- WARNING: The shield must be prop- lowing list. erly installed. The shield provides par- Model 799270 tial protection from the risk of thrown • Trimmer objects to the operator and others. •...
KNOW YOUR TRIMMER READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illu_tr.ations w_h your unit to familiarize yourself with the loca- tion of the various comrols ano aojustments. _ave this manual for future refer- ence. Assist Handle Motor Recessed...
Page 7
the line to make contact. Do not force CORRECT OPERATING trimmer line intowork area. POSITION Scalping SCALPING The scalping technique removes un- wanted vegetation. Hold the bottom of Trimming Edging the trimmer head about 3 in. (8 cm) above the ground and at an angle. Al- Stand as shown and check for the fol- low the tip of the line to strike the lowing:...
Page 8
EDGING POSITION ground. Take extra caution while edg- ing as objects can be thrown from the Press the button and twist the lower trimmer line. portion 180 ° into an edging position. • Button Edging " ," EDGING While edging allow the tip of the line to make contact.
• Insert the line into the exit hole in the Une in hub as shown in the illustration. • Align the notch with the line exit hole. • Push the spool into the hub until it snaps into place. • Pull the line extendin_outside the- hub to release it from the notch.
Prepare unit for storage at end of sea- cannot cause injury. • Store unitand extension cord in- son or if it will not be used for 30 days or more. :_ ..doors in a high, dry place out of the reach of children.
Page 12
Por me repair or rep=acemen[ pans you neeo delivered directly to your home Call 7 am - 7 pm, 7 days a week 1-800-366-PART (1-800-366-7278) Para ordenar piezas con entrega a domicilio - 1-800-659-7084 For in-house major brand repair service Call 24 hours a day, 7 days a week 1-800-4-REPAIR (1-800-473-7247)