AZON COLOR Azon 777HP Fact Sheet

Applications
Fact Sheet
777
Physical Properties
Features & Benefits
Durability
Versatility
Market Applications

Usage Guidelines

Calibration
Operating Conditions
Storage Conditions
Lamination
777N & 777HP View-Thru Film
AZONcolor View-Thru Film is among the most popular products for inkjet output
today. Our patented semi-opaque film is designed specifically for backlit applications
and offers extremely high color fidelity with all types of backlit fixtures. Because our
film is a semi-matte, there is no need to add a diffuser between your output and light
source. Our new "instant dry" coating allows immediate handling of the print.
777N
Caliper .0057"
Opacity 50 - 55%
Sheffield Smoothness
All the benefits of color vibrancy with the durability of heavy polyester.
Print image in reverse for backlit applications or signs and banners.
Ÿ Backlit Displays
Ÿ Murals
Ÿ Posters
It's always best to calibrate (linearize) your printer each and every time you change
media and/or ink sets. Refer to printer manual for specific instructions on calibration.
AZONcolor Inkjet Media works best in controlled operating conditions. Recommended
operating conditions are: Relative Humidity...20-70% and Temperature...65-85 F.
Dry time for your image will vary and is dependent on printer, inks, amount of ink used,
environmental conditions, and media type. Most graphic images can be handled
within 20 minutes of printing. Images using heavy ink coverage may require 30-60
minutes of drying time.
Always store inkjet media in a cool, dry place. Recommended storage conditions
should fall within the guidelines of "Operating Conditions" (see above). If storage
conditions do not fall within these guidelines, it is recommended that the media be
allowed to acclimate to the operating conditions for 48 hours prior to printing.
Overlaminates can provide effective protection of your image from moisture and
limited protection from UV fading of the inks. Another reason to use a laminate is to
add or diminish gloss on your final image output. Both hot and cold laminates are
available with varying results. It is, however, extremely important that your image be
completely dry prior to laminating. Your print may not laminate properly if
laminated before fully dry, causing it to de-laminate over time. We also recommend
that your image be completely dry before mounting to avoid its becoming ruined.
777HP
.0057"
51 – 69%
40 80
Ÿ Digital Fine Art
Ÿ Signs
Ÿ Legal Presentations
Ÿ Trade Show Graphics
Ÿ Point-of-Purchase Displays