Download Print this page

Sony TCM-473V Operating Instructions

Advertisement

Quick Links

3-862-202-61(1)
Cassette-Corder
Operating Instructions
TCM-473V/455V/454VK/453V
Sony Corporation © 1998 Printed in Taiwan, R.O.C.
WARNING
To prevent fire or shock hazard, do not expose the
unit to rain or moisture.
Welcome!
Thank you for purchasing the Sony Cassette-Corder.
Some features are:
•VOR (Voice Operated Recording) system that starts and
stops recording automatically in response to the sound,
to save tapes and batteries.
•SPEED CONTROL function that lets you increase or
decrease the tape playback speed.
•Stereo playback function that lets you enjoy pre-
recorded stereo tapes with the supplied headphones
(TCM-473V only).
About This Manual
The instructions in this manual are for 4 models. The
TCM-453V is the model used for illustration purposes.
Their differences are shown in the table below:
TCM-473V
454VK
455V/453V
g
g
EAR (earphone) jack
2 (Stereo headphones) jack
g
g
Battery charger adaptor
Rechargeable batteries
g
g
AC power adaptor
g: provided or supplied
—: not provided or not supplied
z Getting Started
Preparing a Power Source
Choose one of the following power sources.
Dry Batteries
Make sure that nothing is connected to the DC IN 3V
jack.
1
Open the battery compartment lid.
2
Insert two size R6 (AA) batteries (TCM-455V for
U.S.A.: supplied/Other models: not supplied) with
correct polarity and close the lid.
Notes
• Do not charge a dry battery.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
• When you do not use the unit for a long time, remove the
batteries to avoid any damage caused by battery leakage and
subsequent corrosion.
• Dry batteries will not be expended when another power source
is connected.
To take out the batteries
To attach the battery compartment lid if it is
accidentally detached
Rechargeable Batteries
(supplied to TCM-
454VK only)
Before using the rechargeable batteries, charge them with
the supplied battery charger adaptor and AC power
adaptor.
AC power adaptor
Battery charger
adaptor
DC IN 3V
Power indicator
1
Insert the rechargeable batteries (NC-AA) into the
battery charger adaptor with correct polarity.
2
Connect the AC power adaptor (supplied to TCM-
454VK) to the DC IN 3V jack of the battery charger
adaptor and to the wall outlet.
The power indicator lights up.
3
Unplug the AC power adaptor from the wall outlet
and from the battery charger adaptor after about
eight hours.
Notes
•The power indicator lights in green as long as the AC power
adaptor is plugged to the wall outlet and the DC IN 3V jack,
even when the charging has not been done.
•Use only the supplied or recommended AC power adaptor,
battery charger adaptor and rechargeable batteries.
•The rechargeable batteries can be charged approximately 500
times.
•Do not leave the battery charger adaptor plugged in for more
than 20 hours. Overcharging may damage the rechargeable
batteries.
When to replace the batteries
Replace the batteries
with new ones or charge
the batteries (TCM-
BATT lamp
454VK only) when the
BATT lamp dims.
Notes
•After the batteries have been used for a while, the BATT lamp
may flicker with the playback sound when you turn up the
volume; however, this does not mean that you need to replace
the batteries.
•The unit will play back normally for a while even after the
BATT lamp dims. However, replace the batteries as soon as
you can. If you do not, subsequent recording will not be done
correctly.
Battery life
(EIAJ*)
(Approximate hours)
Playback
Recording
Sony alkaline LR6 (SG)
11
11
Sony R6P (SR)
3
3
(Models for U.S.A. and Canada)
Sony rechargeable
3
3
battery (NC-AA)
fully charged (TCM-
(Model for Europe)
454VK only)
3.5
4
* Measured value by the standard of EIAJ (Electronic Industries
Association of Japan). (Using a Sony HF series cassette tape)
Note
The battery life may shorten depending on the operation of the
unit.
House Current
AC power adaptor
DC IN 3V
Connect the AC power adaptor to DC IN 3V and to the
wall outlet. The AC power adaptor is supplied only with
the TCM-454VK. For other models, use the AC-E30HG
AC power adaptor (not supplied). Do not use any other
AC power adaptor.
Polarity of the plug
Note
Specifications for AC-E30HG varies for each area. Check your
local voltage and the shape of plug before purchasing.
z Operating the Unit
Recording
You can record right away with the built-in microphone.
Make sure that nothing is connected to the MIC jack.
EAR(TCM-455V/454VK/453V)
2(TCM-473V)
MIC VOR
Built-in
microphone
rREC
pSTOP
0REW/
REVIEW
PAUSE
1
Insert a normal (TYPE I) tape with the side to start
recording facing the cassette holder.
2
Set VOR to: H or L to start and pause recording
automatically to the sound.
H (high) to record at meetings or in a quiet and/
or spacious place.
L (low) to record for dictation or in a noisy place.
OFF to start and stop recording manually.
Note
When the sound to be recorded is not loud enough, set the
VOR switch to OFF, or the unit may not start recording.
3
Press r REC.
Recording starts.
At the end of the tape, recording stops and the unit turns
off automatically.
To
Press or slide
p STOP
Stop recording
Pause recording
PAUSE c in the direction of the
arrow
To release pause recording, release
PAUSE c*.
Press and hold 0 REW/REVIEW
Review the portion
just recorded
during recording.
Release the button at the point to start
playback.
* PAUSE c will be also automatically released when p STOP
is pressed (stop-pause-release function).
To monitor the sound
For TCM-473V: Connect stereo headphones (supplied)
firmly to the 2 (headphones) jack.
For TCM-455V/454VK/453V: Connect an earphone (not
supplied) firmly to the EAR jack.
Continue to the reverse side m

Advertisement

loading

Summary of Contents for Sony TCM-473V

  • Page 1 — rREC * Measured value by the standard of EIAJ (Electronic Industries 2 (Stereo headphones) jack — — pSTOP Association of Japan). (Using a Sony HF series cassette tape) Rechargeable Batteries (supplied to TCM- Battery charger adaptor — — 0REW/...
  • Page 2 VOR to H or L, set VOR to OFF. 0 REW/REVIEW m The AC power adaptor or car battery cord is not mechanical shock. •Sony DCC-E230 car battery cord (not supplied) for use on ) FF/CUE firmly connected. •Should any solid object or liquid fall into the unit, 12 V car battery.

This manual is also suitable for:

Tcm-454vTcm-k435vTcm-455vTcm-453v