Download Print this page

Frigidaire FSG748GF Operating Instructions

Advertisement

Quick Links

MOISTURE SENSOR
INTERIOR DRUM LIGHT

Before Operating Your Dryer

Read your dryer Owner's Guide. It has important
safety and warranty information. It also has many
suggestions for best drying results.
To reduce the risk of fire, electric shock,
or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS in your dryer Owner's Guide before
operating this appliance.

Operating Steps

Read Drying Procedures in your Owner's Guide. It
explains these operating steps in detail.
1. Prepare items for drying.
2. Check that lint screen is clean and in place.
3. Load the dryer. If desired, add a dryer fabric
softener sheet.
4. Close the dryer door.
5. Set Dry Temperature and Cycle Signal controls.
Printed in U.S.A.

OPERATING INSTRUCTIONS

6. Turn cycle selector clockwise to desired setting.
7. Start dryer. Turn the Turn to Start control clockwise
to ON. Hold for 1-2 seconds and release.
8. When Cycle Signal control is on, a signal will
sound at the end of the cycle.
9. Remove items immediately and hang or fold.
10. Clean lint screen after every load.
Temperature Selection
Always follow directions on fabric care labels.
To avoid fire hazard, do not use heat to
dry items containing feathers or down, foam rubber,
plastics, or similarly textured, rubber-like materials. Use
Air Fluff-No Heat setting only.
The REGULAR-HIGH HEAT, PERM PRESS-MEDIUM
HEAT, and KNITS/DELICATES-LOW HEAT temp-erature
settings may be used with any cycle setting. The AIR
FLUFF-NO HEAT setting can be used only in the Timed
Dry cycle.
Cut along this edge to separate English from other languages.
AUTOMATIC
PERM PRESS
TIMED DRY
REGULAR
TIMED DRY
REGULAR
AIR FLUFF-NO HEAT setting tumbles the load without
heat. Use Air Fluff to freshen clothing, pillows or blankets,
or to dust draperies.

Cycle Selection

Turn cycle selector clockwise to desired cycle and
setting.
Each cycle ends with a cool down period. The heat
automatically turns off and the load continues to tumble
during the cool down period. This reduces wrinkling and
makes items easier to handle during unloading.
Drying time varies depending on size and dampness of
load, weight and fabric type. Room temperature and
humidity, type of installation and electrical voltage or gas
pressure can also affect drying time.
(continued, reverse side)
FSEC/FSGC748GF
FSE/FSG748GF
AUTOMATIC
REGULAR
AUTOMATIC
DELICATE
P/N 131713000 (9803)

Advertisement

loading

Summary of Contents for Frigidaire FSG748GF

  • Page 1: Operating Instructions

    FSEC/FSGC748GF OPERATING INSTRUCTIONS FSE/FSG748GF AUTOMATIC AUTOMATIC PERM PRESS REGULAR MOISTURE SENSOR TIMED DRY AUTOMATIC INTERIOR DRUM LIGHT REGULAR DELICATE TIMED DRY REGULAR Before Operating Your Dryer 6. Turn cycle selector clockwise to desired setting. AIR FLUFF-NO HEAT setting tumbles the load without heat.
  • Page 2: Energy Saving Tips

    AUTOMATIC AUTOMATIC PERM PRESS REGULAR MOISTURE SENSOR TIMED DRY AUTOMATIC INTERIOR DRUM LIGHT REGULAR DELICATE • When the Cycle Signal is on, it will sound briefly Cycle Selection • Unheated tumbling continues during the Press Saver (continued) every 5 minutes as a reminder to remove the load. for 22 minutes to help reduce wrinkling.

This manual is also suitable for:

Fsgc748gfFse748gfFsecc748gfFsec748gf