Download
Share
Print this page
  1. Manuals
  2. Brands
  3. COMPANION Manuals
  4. Drill
  5. COMPANION 320.10191
  6. Operator's manual

COMPANION 320.10191 Operator's Manual

3/8-in. electric drill reversible
Hide thumbs

Advertisement

Quick Links

Download this manual
I
I
I
I
Operator's Manual
Companion
3/8-in. Electric Drill
Reversible
Model No.
320. 10191
./_CAUTION:
Read, understand and follow
all Safety Rules and Operating Instructions in
this manual before using this product.
• SAFETY
• OPERATION
• MAINTENANCE
Sears, Roebuck and Co., Hoffman
Estates,
IL 60179 U.S.A.
I
I
I
I

Advertisement

loading

Related Manuals for COMPANION COMPANION 320.10191

Summary of Contents for COMPANION COMPANION 320.10191

  • Page 1 3/8-in. Electric Drill Reversible Model No. 320. 10191 ./_CAUTION: Read, understand and follow • SAFETY • OPERATION all Safety Rules and Operating Instructions in this manual before using this product. • MAINTENANCE Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

  • Page 2: Warranty

    RETURN ITTO 4. ALWAYS avoid body contact with grounded surfaces, such as pipes, radiators, THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears will ranges and refrigerators. There is an increased risk of electric shock if your body replace it, free of charge.
  • Page 3 9. Use only accessories recommended for this tool that are sold by Sears or a Craftsman outlet. Use of any accessories purchased elsewhere may be NOTE: Advises you of information or instructions vital to the hazardous.
  • Page 4 A guard or other part that is damaged should be properly repaired or are specially designed to filter out microscopic particles. replaced at a Sears Service Center. Following this rule will reduce the risk of electric shock, fire or serious injury.
  • Page 5 Inspect the tool carefully to make sure Input 4.0 Amps that no breakage or damage has occurred during shipping. If any parts are damaged or missing, return the electric drill to your nearest Sears Store to have it No-load speed 2500 RPM replaced.
  • Page 6 DRILL BITS AND ACCESSORIES /k WARNING: ALWAYS wear safety goggles or safety glasses with side Your drill can accept drill bits and accessories with shafts and arbors 3/8 in. or less shields when operating your electric drill. Failure to do so could result in foreign in diameter.

  • Page 7: Removing Drill Bits

    REMOVING DRILL BITS GENERAL DRILLING TIPS cont. 1. Unplug your drill. When drilling in smooth, hard surfaces (such as metal and hardwoods), use a center punch (sold separately) to mark the desired hole location. This will prevent the drill bit from slipping off center as the hole is started.
  • Page 8 All service that requires opening the drill MUST only be performed by a Sears Service Center. All motor parts represent an important part of the double insulation system and MUST only be serviced by a Sears Service Center.
  • Page 9 DRILL BITS AND OTHER ACCESSORIES FOR USE WITH YOUR 3/8-in. DRILL Sears has a large selection of standard drill bits for both wood and metal, power wood bits, hole saws, masonry bits, wire brushes, sanding wheels and buffing wheels for use with a variety of materials and in many applications.
  • Page 10 Seal © Sears, Roebuckand Co. ® Registered Trademark / TMTrademark / SMService Mark of Sears, Roebuck and Co, ® Marca Registrada / TMMarca de F.brica / SMMarca de Servicio de Sears, Roebuck and Co. Marque de commerce Marque d@osee de Sears,...