Dometic 3307896.005 Installation Instructions

3307896.005 REFRIGERATOR HINGE REPAIR KIT (Beige)
3307910.004 REFRIGERATOR HINGE REPAIR KIT (Black)
KIT CONTAINS:
(1) 3307888.002
3307886.006
(1) 3307889.000
3307887.004
(2) 2931171066
2931171041
(3) ---------------
(1) 33078997.003

INSTALLATION INSTRUCTIONS

1. Remove refrigerator door(s)(Refer to Owners Manual for
detailed instructions on this procedure).
2. Examine the broken area to determine if hinge kit will
properly repair the hinge. A substantial amount of the
door hinge socket must be remaining to hold the bush-
ing or the repair kit will not allow the door to properly
align. See FIG. 1 and FIG. 1A.
FIG. 1
Small chip
out of
Hinge
3. If the door hinge socket is broken in a way that the
bushing cannot be held by the hinge, the entire door
must be replaced. See FIG. 2 and Fig. 2A.
FIG. 2
Large
Crack
REVISION:
Form No. 3307897.011 4/02
(Replaces 3307897.003)
(French 3307898.019)
©2002 Dometic Corporation
LaGrange, IN 46761
INSTALLATION INSTRUCTIONS
Hinge Plate, RH Top/LH Btm-Blk or
Hinge Plate, RH Top/LH Btm-Beige
Hinge Plate, LH Top/RH Btm- Blk or
Hinge Plate, LH Top/RH Btm-Beige
Bushing, Black or
Bushing, Beige
Screw, #4x0.75 Philips PH
Installation Instructions
FIG. 1A
Small chip
out of
Hinge
FIG. 2A
Front Half of
Door Hinge
Socket Missing
FOR
and
This Kit is applicable for the following refrigerator
models:
NDR1062
RM1272
RM2852
RM3862
4. Locate the correct Hinge Plate in the contents of the
kit. Fit the bracket on the broken hinge. Place the bush-
ing in the hinge to properly center the Hinge plate on
the broken hinge. Use a scratch awl to mark the loca-
tion for the screws. See FIG. 3.
Use Hinge Plate
For Template
5. Predrill three 3/32" holes into the door hinges as marked
in step 4.
6. Place new bushing in the door hinge socket. Put the
hinge plate in place and install the three #4x3/8" screws.
7. Re-install the door back on the refrigerator.
NDR1292 NDR1492
RM1282 RM2652
RM3662 RM3663
RM3863
FIG. 3
Use Scratch Awl to
Mark Hole Locations