Dymo Compact Instruction Manual

Open the door located on the handle.
Extend the embossing tape about
two inches. This will allow for
easier loading of the tape.
Close the tape compartment door.
Squeeze the handle a few times to
help feed the tape through the unit.
Turn the wheel and select the
Squeeze the handle to cut the tape.
DYMO I.D. (3/8" and 1/4" Tape)
DYMO Compact (3/8" Tape)
Insert the embossing tape into the
slot located at the top of the tape
Turn the wheel to select the desired
character. Once you've selected the
character you'd like to emboss,
firmly squeeze the handle.
Remove the backing and apply
the tape to the desired surface.
compartment
.