Edelbrock For 1994-1995 Ford F-Series 8046 Installation Instructions

Victor series aluminum water pumps for 1994-1995 f-series trucks with 5.0l, with serpentine belt

Download this manual

Please study these instructions carefully before installing your new Edelbrock water pump. Failure to follow instruction will void warranty

and may cause damage to parts and/or personal injury. If you have any questions or problems, please call our Technical Hotline at: 1-800-416-

8628, 7:00 am – 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at Edelbrock@Edelbrock.com. PLEASE complete and mail

your warranty card. Be sure to write the model number of this product in the "Part #____" space.

• DESCRIPTION: The Edelbrock aluminum water pump is a heavy-duty water pump for both street and racing applications. The pump is externally

the same as the original equipment pump (Ford #E9TE-8505-A4A) to provide compatibility with all accessories and pulleys. It offers increased

durability and cooling potential. Part #8045 is a reverse rotation water pump for 1994-1995, 5.0L V8s with serpentine drive belt. Not for early

standard rotation 289-302 engines. Polished aluminum water pump Part #8046 fits the same applications as Part #8045.

• INSTALLATION: Installation is the same as for original equipment water pumps. Consult service manual for specific procedures, if necessary.

• CAUTION: Be sure that fan bolts don't protrude through the hub so far that they hit the water pump housing. NOTE: Remove two screws from

backing plate and apply RTV silicone to gasket just before installation. Re-assemble backing plate and install on engine using RTV silicone.

• SPECIAL NOTES: Check closely for any interference with drive belts; some filing for clearance may be necessary with some applications.

• SPECIFICATIONS: Dimension from block surface to hub: Part #8045 - 5-3/4".

• THANK YOU.

Brochure #63-0232