Dynex DX-S114251 Quick Setup Manual

DX-S11425-TVSRGE_10-0643_QSG_V1.eps 1 7/8/2010 3:42:05 PM DX-S11425-TVSRGE_10-0643_QSG_V1.eps 1 7/8/2010 3:42:05 PM
Package contents
• Travel surge protector
• Quick Setup Guide
Features
DX-S114251/DX-TVSRGE
Travel Surge Protector / Parasurtenseur de voyage /
Protector contra sobrevoltaje de viaje
DX-S114251 DX-TVSRGE
Front / Face avant / Vista frontal Front / Face avant / Vista frontal
Side
Panneau latéral
Vista lateral
Quick Setup Guide / Guide d'installation rapide / Guía de instalación rápida
V1
FINAL
FOR PRINT
Using the surge protector
1 Fold out the swivel plug (4) and plug it into a standard
3-prong grounded AC outlet.
2 Plug AC-powered devices into the AC outlets (3) for surge
protected powering/charging of the connected devices.
USB charger/surge protection: The USB port(s) can be
3 Plug USB-powered devices into the USB ports (2) for surge
used to power/charge devices with USB power/charging
protected powering/charging of the connected devices.
capability; and also provide surge protection to connected
Caution: Risk of electric shock. Use only in dry locations and only indoors.
devices.
• Do not plug into another relocatable power tap.
LED indicator (model DX-S114251 only): A lit
• Do not plug into another power strip or surge protector
'Protected' green LED indicates that the surge protection
("daisy chain").
feature is working properly. If the LED does not light, it
• Do not use with any aquarium equipment.
means that either the unit has reached its maximum surge
• Do not use if properly grounded outlets are not available.
absorbtion capacity and must be replaced, or that the
• Do not install this device if there is not at least 30 feet (10
outlet in which the unit is plugged into is not properly
meters) or more of wiring between the electrical outlet and
grounded.
electrical service panel.
Try the unit in a different AC outlet, if the LED continues to
FCC Part 15
not light, replace the unit or have a certified electrician
check your electrical wiring.
1 This device may not cause harmful interference, and
AC Outlets: Provides two (DX-TVSRGE) or three
2 This device must accept any interference received, including interference that
(DX-S114251) surge protected 110/120V AC; 50/60 Hz
may cause undesired operation.
outlets.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user' s authority to operate the equipment. This Class B
Swivel plug: Convenient swivel plug folds in for portability
digital apparatus complies with Canadian ICES-003.
while traveling.
Note: These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures: Reorient or relocate the receiving antenna. Increase the separation
between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
This device is manufactured using environmentally-safe procedures in compliance
with the Restriction on Hazardous Substances (RoHS) directive.
One-year limited warranty
Visit www.dynexproducts.com for details.
© 2010 BBY Solutions, Inc. All Rights Reserved.
DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other
products and brand names are trademarks of their respective owners.
Contenu de l' e mballage
• Parasurtenseur de voyage
• Guide d'installation rapide
Caractéristiques
This device complies with Part 15 of the FCC Rules.
Chargeur USB/parasurtenseur : Le ou les ports USB
Operation is subject to the following two conditions:
peuvent être utilisés pour alimenter ou charger des
périphériques compatibles avec l'alimentation/charge USB;
il intègre également une protection des périphériques
contre les surtensions.
Témoin à DEL (modèle DX-S114251 uniquement) :
Une DEL verte allumée, signifie que le parasurtenseur
fonctionne correctement. Si la DEL ne s'allume pas, cela
signifie que l'appareil a atteint sa capacité maximale
d'absorption de surcharge et doit être remplacée ou que la
prise secteur sur laquelle il est branché n' e st pas
correctement mise à la terre.
Essayer l'appareil dans une prise secteur c.a. différente, si la
DEL ne s'allume toujours pas remplacer l'appareil ou
demander à un électricien qualifié de vérifier le câblage
électrique.
Prises c.a. : fournissent deux (DX-TVSRGE) ou trois
(DX-S114251) prises protégées contre les surtensions de
110/120 V c.a., 50/60 Hz.
Fiche pivotante : la prise pivotante commode, se replie
pour faciliter la portabilité pendant les déplacements.
Utilisation du parasurtenseur
1 Déplier la prise pivotante (4) et la brancher sur une prise
secteur standard c.a., mise à la masse à trois plots.
2 Brancher les périphériques à alimentation c.a. sur les prises
c.a. (3) pour les protéger contre les surtensions ou les
charger.
3 Brancher les périphériques à alimentation USB sur les ports
USB (2) pour les protéger contre les surtensions ou les
charger.
Attention : risque de choc électrique. N'utiliser qu'à l'intérieur et dans un
environnement sec.