Page of 3

HP AJ732A - Cisco MDS 9134 Fabric Switch Release Note

Hp c-series nexus 5000 converged network switches for nx-os 4.0(1a)n1(1) release notes (aa-rwq2a-te, june 2009).
Hide thumbs
   
HP C-series Nexus 5000
Converged Network Switches
for NX-OS 4.0(1a)N1(1)
This document provides additional information about the Nexus 5000 Converged Network
Switch
© 2003 - 2009 Hewlett-Packard Company
Printed in the U.S.A.
Product names mentioned herein may be trademarks of their respective companies as reflected by an
associated footnote. The information in this document is subject to change without notice.
Part Number: AA-RWQ2A-TE
June 2009

Advertising

   Related Manuals for HP AJ732A - Cisco MDS 9134 Fabric Switch

   Summary of Contents for HP AJ732A - Cisco MDS 9134 Fabric Switch

  • Page 1: Release Notes

    Converged Network Switches for NX-OS 4.0(1a)N1(1) This document provides additional information about the Nexus 5000 Converged Network Switch © 2003 - 2009 Hewlett-Packard Company Part Number: AA-RWQ2A-TE Printed in the U.S.A. June 2009 Product names mentioned herein may be trademarks of their respective companies as reflected by an...

  • Page 2

    REFER TO THE CISCO NEXUS 5000 NX-OS RELEASE NOTES FOR A COMPLETE LIST OF NEW FEATURES AND OTHER INFORMATION PERTINENT TO THIS RELEASE As part of the NX-OS 4.0(1a)N1(1) image updates provided by HP, the Cisco Nexus 5000 Series Release Notes for 4.0(1a)N1(1) have been included in the bundle. For a complete list and detailed description of features included in the NX-OS 4.0(1a)N1(1) release, refer to the Cisco release notes as appropriate.

  • Page 3: Serial Port

    SERIAL PORT You must use the serial interface to configure the switch management IP address. Refer to the Cisco Nexus 5000 Series Hardware MDS 9000 Family Configuration Guide for instructions on how to connect the serial port to a host machine. INITIAL INSTALLATION RECOMMENDATIONS FOR SETTING UP FC The C-series Nexus 5000 Family of switches does not automatically allow FCoE connectivity for...

Comments to this Manuals

Symbols: 0
Latest comments: