Introduction - BBE DS24 User And Reference Manual

®
v
Thank you for choosing the BBE DS24/DS26 Speaker Management System.
This product will enable you to obtain the best possible performance from
your loudspeaker system. You can also reduce the amount of outboard gear
that is required to transport, set-up and operate as part of the sound system.
The DS24/DS26 offers many powerful functions. It is highly recommended
that you read through this manual before you begin connection and operation.
For those that are familiar with this type of device or if you simply can't wait
to hear how good your system will sound, a Quick Start section follows on
pages 4-5.
SOME TERMS THAT WILL BE USED IN THIS MANUAL:
Configuration: This refers to a particular group of settings, with
the primary parameter being the crossover type.
Program: A program is a configuration with either the factory
default or a user-created name.
Configuration and Program may be used interchangeably, though
a configuration must be programmed for a program to exist.
Parameter: A component of a setting such as the center frequen-
cy of one band of parametric EQ or the attack time of a limiter.
WARNING!
amplifier damage, always power-up peripheral
devices first, wait 10 seconds, and then turn on the
power amplifier. Turn off power amplifier first, then
power-down peripheral devices.

INTRODUCTION

To prevent possible speaker or