1. Manuals
  2. Brands
  3. TP-Link Manuals
  4. Adapter
  5. TL-WN725N
  6. User manual

TP-Link TL-WN725N User Manual

150mbps wireless n nano usb adapter
Hide thumbs Also See for TL-WN725N:
Table of Contents

Advertisement

Quick Links

See also: User Manual
TL-WN725N
150Mbps Wireless N Nano USB Adapter
Rev: 1.0.0
1910010668

Advertisement

Table of Contents
loading

Related Manuals for TP-Link TL-WN725N

Summary of Contents for TP-Link TL-WN725N

  • Page 1 TL-WN725N 150Mbps Wireless N Nano USB Adapter Rev: 1.0.0 1910010668...
  • Page 2 Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.

  • Page 3: Fcc Statement

    FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 4: Ce Mark Warning

    CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. National Restrictions This device is intended for home and office use in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below: Country...
  • Page 5 IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence.

  • Page 6: Declaration Of Conformity

    TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: 150Mbps Wireless N Nano USB Adapter Model No.: TL-WN725N Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives:...

  • Page 7: Table Of Contents

    CONTENTS Package Contents ....................1 Chapter 1 Product Overview ................. 2 1.1 Introduction ......................2 1.2 Features ........................2 1.3 Hardware Overview....................3 Chapter 2 Installation..................... 4 2.1 Hardware Installation ....................4 2.2 Software Installation....................5 Chapter 3 Connect to a Wireless Network ............10 3.1 To connect using TWCU ..................

  • Page 8: Package Contents

    Make sure that the above items are contained in the package. If any of the above items are damaged or missing, please contact your distributor. Note: The ‘adapter’ mentioned in this User Guide stands for TL-WN725N 150Mbps Wireless N Nano USB Adapter without any explanations.

  • Page 9: Chapter 1 Product Overview

    The adapter is easy to install and manage with the Quick Setup Wizard guiding you step-by-step through the installation process and the TP-LINK Wireless Configuration Utility instructing you to quickly set up a wireless connection. With unmatched wireless performance, reception, and security protection, the TL-WN725N is the best choice for easily adding or upgrading wireless connectivity to your desktop.

  • Page 10: Hardware Overview

    TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide 1.3 Hardware Overview LED status: Status Working Status The driver has not been installed; The adapter's radio has been disabled. The driver has been installed but no data is being transmitted or Flashing Slowly received.

  • Page 11: Chapter 2 Installation

    TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Chapter 2 Installation 2.1 Hardware Installation Plug the Adapter directly to the USB port on your computer. Note: When the hardware has been successfully installed on your computer, you will be prompted 'Found New Hardware Wizard' (as shown in Figure 2-1 and Figure 2-2);...

  • Page 12: Software Installation

    Windows 7 for example. Insert the Resource CD into your CD-ROM drive and then select model TL-WN725N on the window that pops up (as shown in the below Figure 2-3). There will be a menu including: Install Driver&Utility and User Guide.
  • Page 13 TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide You will be prompted to choose a setup language from a drop-down list of 14 ones; then click OK to proceed. As follows we take English setup for example. Figure 2-4 The InstallShield Wizard window will appear.
  • Page 14 TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Choose a setup type. It is recommended to select Install TP-LINK Wireless Configuration Utility and Driver. Selecting Install Driver Only will only install driver. Click Next to continue. Figure 2-6 Click Change… to specify the destination location for the software or you can leave it default.
  • Page 15 TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Click Install to continue the setup. Figure 2-8 The utility and drivers will install. This may take 1~2 minutes. Figure 2-9...
  • Page 16 TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide After all the steps above, you will see the screen below. Click Finish to complete the setup. Figure 2-10 After installation, the utility configuration page will automatically pop up as shown in the following figure and the icon will appear in your system tray.

  • Page 17: Chapter 3 Connect To A Wireless Network

    Method One: To connect using TWCU (TP-LINK Wireless Configuration Utility) TL-WN725N uses the TWCU as the management software. The utility provides you an easy interface to connect to a network and to change any settings related to the wireless adapter.
  • Page 18 TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Figure 3-2 You will be prompted different windows when you choose wireless network of different security types. Wireless network of WPA/WPA2-PSK If you selected a wireless network of the security type WPA/WPA2-PSK, you will be prompted to enter the password in the security key field, as shown in Figure 3-3.
  • Page 19 TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide authentication, you need to select one specific certificate from the drop-down list, as shown in Figure 3-4. With Password as your authentication, you should enter the right user name and password in the corresponding field, as shown in Figure 3-7.
  • Page 20 TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Please wait a few minutes for the connection process. Figure 3-6 You have now successfully connected to your network. Click Close to enjoy the Internet. Figure 3-7 To view more information about the network currently connected, click Status in the tools...

  • Page 21: To Connect Using Wps

    TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Figure 3-8 3.2 To connect using WPS WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing network quickly. If your wireless Router supports WPS or QSS (Quick Security Setup), you can establish a wireless connection between wireless card and Router using either Push Button Configuration (PBC) method or PIN method.
  • Page 22 TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Open TWCUand click WPS tab. Select Push the button on my access point or wireless Router and then click Connect. Figure 3-9 The adapter will be connecting to the target network.

  • Page 23: Pin Method

    TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide When the following window appears, you have successfully connected to the network. Figure 3-11 3.2.2 PIN method There are two ways to configure the WPS by PIN method: Enter the PIN from your Router or AP device.
  • Page 24 TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide The adapter will be connecting to the target network. Figure 3-13 When Figure 3-11 appears, you have successfully connected to the network. 3.2.2.2. Enter a PIN into your AP device Open TWCU and click WPS tab. Select Enter the PIN of this device into my access point or wireless Router.

  • Page 25: To Connect Using Windows Built-In Wireless Utility

    TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Figure 3-15 When Connect successfully appears on the screen (as shown in Figure 3-16), the WPS configuration is complete. Or you can view the adapter’s utility page to see whether the connection has been successful (as shown in Figure 3-17).
  • Page 26 TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Left-click the wireless icon in your system tray (lower-right corner). The utility will display any available wireless networks in your area. Highlight the wireless network (displayed using the SSID) to be connected and then click Connect.

  • Page 27: In Windows Vista

    TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide You have now successfully connected to the network. Figure 3-20 3.3.2 In Windows Vista Windows Vista users may use the built-in wireless utility. Follow the steps below. Open the wireless utility by right-clicking on the wireless computer icon in your system tray as shown in the figure below.
  • Page 28 TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Figure 3-22 If the network you would like to connect is security-enabled, enter the same security key or passphrase that is on your Router. If the network to be connected is not secure, the connection will be built without entering a key.

  • Page 29: In Windows Xp

    Windows XP users may use the built-in wireless utility. Follow the steps below. Right-click on the utility icon in your system tray (lower-right corner). Select Switch to TP-LINK Wireless configuration Utility. Figure 3-25 Or double-click the utility icon to load the utility configuration page. Click Advanced in the tools section and then select Use Windows wireless configuration tool in the figure shown below.
  • Page 30 TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Figure 3-26 Figure 3-27 Right-click on the wireless computer icon in your system tray (lower-right corner). Select View Available Wireless Networks. Figure 3-28 The utility will display any available wireless networks in your area. Click on a network...
  • Page 31 TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Figure 3-29 If the network is security-enabled, you will be prompted to enter the key as shown below. If not, you will connect to the network directly without entering a key.

  • Page 32: Chapter 4 Management

    150Mbps Wireless N Nano USB Adapter User Guide Chapter 4 Management This section will show you how to configure your TL-WN725N adapter using the TP-LINK Wireless Configuration Utility (TWCU). The TL-WN725N adapter uses the TP-LINK Wireless Configuration Utility as the management software.
  • Page 33 TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Figure 4-2 Figure 4-3 The following items can be found on the screen. Profile Name: Enter a name for your profile (e.g. Home, Office, Coffee Shop). The same name is not allowed. Please also note that no space is allowed between words.

  • Page 34: Modify A Profile

    TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Note: You will see Figure 4-2 if you selected the security type WPA-PSK/WPA2-PSK; while, if you selected the security type WPA/WPA2, Figure 4-3 will be displayed. Encryption Type: From the drop-down menu, select the encryption type that is the same as on your Router or access point.

  • Page 35: Delete A Profile

    To select wireless configuration tool. (This option is available only in Windows XP.) Here you can decide which tool to use, either the TP-LINK Configuration Utility or the Windows wireless configuration tool. To switch to another wireless network adapter. Here you can switch to another adapter installed in your computer. The adapters successfully installed in your computer will be listed in the drop-down list if the adapters are supported by this utility.

  • Page 36: About

    TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Figure 4-7 4.3 About The About screen gives you some information about the Driver and Utility versions of the adapter. Right-click the icon in your system tray and select About from the list.

  • Page 37: Chapter 5 Ap Mode

    TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Chapter 5 Soft AP Mode In Soft AP mode, the adapter will work as an AP. Suppose that only one computer in your house can access the Internet for various reasons like only one WLAN port is available on your wired broadband Router, however, other wireless-capable devices also want to share the Internet.
  • Page 38 SSID: Enter the name for your soft AP (for example, Jone) so that others can know which AP is yours when trying to connect to it. The default name (SSID) is “tp-link”. Security Type: The security type here is set to be WPA2-PSK which is based on 802.11i and uses Advanced Encryption Standard instead of TKIP.

  • Page 39: Chapter 6 Uninstall Software

    150Mbps Wireless N Nano USB Adapter User Guide Chapter 6 Uninstall Software 6.1 Uninstall the utility software from your PC On the Windows taskbar, click the Start button, click All programs TP-LINK, and then click Uninstall-TP-LINK Wireless Configuration Utility. Figure 6-1 Uninstall Utility Click Yes to start uninstalling the utility software from your PC.

  • Page 40: Uninstall The Driver Software From Your Pc

    It may take a few minutes to undergo the whole un-installation process. Figure 6-3 Click Finish when the figure below appears. Figure 6-4 6.2 Uninstall the driver software from your PC On the Windows taskbar, click the Start button, click All programs TP-LINK, and then click Uninstall-TL-WN725N Driver.
  • Page 41 TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Figure 6-5 Uninstall Driver Click Yes to start uninstalling the driver software from your PC. Figure 6-6 It may take a few minutes to undergo the whole un-installation process.
  • Page 42 TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Figure 6-7 Click Finish when the figure below appears. Figure 6-8...

  • Page 43: Appendix A: Specifications

    TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Appendix A: Specifications Normal Interface USB 2.0 Interface Standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Operating System Windows XP, Windows Vista, Windows 7 Throughput 150Mbps (Maximal) 11b: 1/2/5.5/11Mbps 11g: 6/9/12/18/24/36/48/54Mbps Radio Data Rate...

  • Page 44: Appendix B: Glossary

    TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Appendix B: Glossary 802.11b - The 802.11b standard specifies a wireless product networking at 11 Mbps using direct-sequence spread-spectrum (DSSS) technology and operating in the unlicensed radio spectrum at 2.4GHz, and WEP encryption for security. 802.11b networks are also referred to as Wi-Fi networks.
  • Page 45 TL-WN725N 150Mbps Wireless N Nano USB Adapter User Guide Spread Spectrum - Spread Spectrum technology is a wideband radio frequency technique developed by the military for use in reliable, secure, mission-critical communications systems. It is designed to trade off bandwidth efficiency for reliability, integrity, and security. In other...

Table of Contents