Panasonic BB-HCM705A - Fixed MP H.264 Dome POE Indoor Network Camera Installation Manual

Installation Guide

Network Camera
BB-HCM701
Model No.
BB-HCM705
This manual is written for both the BB-HCM701 and the BB-HCM705. Available features and operations vary slightly depending on the model. You can
confirm the model no. of your camera by checking the model no. printed on the front of the camera.
Model number suffixes ("A" and "CE") are omitted from the following model numbers shown in this document, unless necessary.
BB-HCM701A, BB-HCM701CE, BB-HCM705A, BB-HCM705CE
Please read the included Important Information before proceeding.
Complete Operating Instructions and all other documentation can be found on the included CD-ROM.
• This document (Installation Guide) explains how to physically connect the
camera to the power supply and network, as well how to mount or place the
camera for regular use.
• The Setup Guide describes how to set up the camera so that it can be
accessed using a PC.
Abbreviations
• UPnP is the abbreviation for "Universal Plug and Play".
• The Network Camera is referred to as "the camera" in this document.
• The Setup CD-ROM is referred to as "the CD-ROM" in this document.
Installation Procedure Overview
The following is an overview of the steps required to install and setup the camera. All steps are explained in this document unless otherwise noted.
Preparation Camera Diagram
Confirm that you have all the Make sure you know the
items required for names of the camera's
installation. physical features.
Preparation
1. Confirm the following items are included in the camera's packaging.
Main Unit (1 pc.)
Washer A (1 pc.)
Order No.
XWG4F16VW
Used when securing the
safety wire to the ceiling.
Important Information (1 pc.)
Installation Guide (this document) (1 pc.)
Setup Guide (1 pc.)
Stand-alone SD Memory Card Recording Guide (1 pc.)
2. You will need the following additional items to install and configure the camera.
– a PC (see the system requirements in the Important Information document)
– a router
Option
You can also connect the camera using the optional Panasonic BB-HCA7A, BB-HCA7CE or BB-HCA7E AC adaptor. The optional AC adaptor includes the
following items. (For more information, consult your authorized Panasonic dealer.)
BB-HCA7A
AC Adaptor (1 pc.)
Cord Length: About 3 m
(9 feet 10 inches)
BB-HCA7CE (2 pin AC cord)
AC Adaptor (1 pc.)
Cord Length: About 3 m
(9 feet 10 inches)
BB-HCA7E (3 pin AC cord)
AC Adaptor (1 pc.)
Cord Length: About 3 m
(9 feet 10 inches)
• The AC adaptor, the AC adaptor cord, the AC cord, and the extension cord are not splash resistant, and are intended for indoor use only. The AC adaptor, the
AC adaptor cord, the AC cord, and the extension cord must be waterproofed for outside use.
© Panasonic System Networks Co., Ltd. 2009
PNQX1983XA KK0709CQ3129
(PoE Ready)
Indoor Use Only
Indoor Use Only
Connections
Connecting the camera to
your network and to the power
outlet.
Bit (1pc.)
[BB-HCM701CE/
BB-HCM705CE Only]
Order No. PNMH1086Z
Used to secure the
camera cover.
Washer B (1 pc.)
Order No.
XWG26D12VW
Used when securing the
safety wire to the
camera.
Please read this document before using the product, and save this document for future
reference. Panasonic Network Camera Website:
http://panasonic.net/pcc/ipcam/
• Refer to the Operating Instructions on the CD-ROM for details regarding
the camera's features.
• Refer to the Troubleshooting Guide on the CD-ROM if you have any
problems configuring or using the camera.
• The Stand-alone SD Memory Card Recording Guide describes how to
record images to an SD memory card without using a PC.
• The term "SD memory card" is used in this document to refer to SD memory
cards and SDHC memory cards.
Setup
Setting up the camera (described in the included
Setup Guide). This involves configuring the camera
so that it can be accessed from a PC.
Screw A (4 pcs.)
Order No. XTB4+20AFJ
Used to secure the
camera (3 pcs.) and the
safety wire to the ceiling
(1 pc.).
Safety Wire (1 pc.)
Order No.
PQME10080Z
Used to secure the
camera when mounting
it.
Setup CD-ROM (1 pc.) Order No. PNQC1016N
Contains the Setup Program needed to configure the camera, as well as the
camera's documentation.*
*See the included Important Information for a description of each document.
– a LAN cable (CAT-5 straight cable)
AC Cord (1 pc.)
Cord Length: About 1.8 m
(5 feet 11 inches)
AC Cord (1 pc.)
Cord Length: About 1.8 m
(5 feet 11 inches)
AC Cord (1 pc.)
Cord Length: About 1.8 m
(5 feet 11 inches)
Mounting
Mounting or placing the
camera.
Screw B (1 pc.)
Order No.
XTB26+10GFJ
Used for connecting the
safety wire to the
camera.
Template (1 pc.)
Order No. PNPD1302Z
Used when marking
holes for the cables and
screws.
Extension Cord (1 pc.)
Cord Length: About 7 m
(23 feet)
Extension Cord (1 pc.)
Cord Length: About 7 m
(23 feet)
Extension Cord (1 pc.)
Cord Length: About 7 m
(23 feet)
1