Download Print this page

Kyocera LYNCOM SR7 Datasheet

Battery and load controllers

Advertisement

Quick Links

Models SR7 and SR7C are advanced pro d u c t s
designed for use in small size solar electric
systems, typically used for re c reational vehicles,
w i reless-local-loop applications, small rural
electrification and intro d u c t o ry level PV
systems. The controllers solid state design
p rovides a cost-effective migration of
technology for users and systems curre n t l y
using relay based or traditional "on/off"
c o n t rollers. The SR series features a
pulse-width-modulation circuit, which
positively ensures a well-controlled bulk
and then taper charge of the battery at the
regulated voltage. This unique design
without the micro p rocessor finally brings to the first-time user a PWM product at a price,
which is extremely attractive. The SR7C is a charge-only model and SR7 is supplied with a
LVD as standard. Controller status is displayed on three LEDs.
S t a n d a rd Feature s
Advanced solid state design
Pulse-width-modulation charge algorithm to
extend battery life compared to conventional
" o n - o ff" type contro l l e r s
Te m p e r a t u re compensation circuit to
automatically adjust the optimum battery
regulation voltage and LVD voltage.
Lightning/transient pro t e c t i o n
PV and battery reverse polarity pro t e c t i o n
Selection of battery type between
flooded and sealed
Parallel capability
5 year limited warr a n t y
7812 EAST ACOMA DRIVE
SCOTTSDALE, AZ 85260 USA
480/951-6330 • 800/544-6466
FAX: 480/951-6329
www.kyocerasolar.com
e-mail: info@kyocerasolar.com
LYNCOM MODELS SR7 AND
SR7C BAT T E RY AND LOAD
C O N T R O L L E R S
R a t i n g s
B a t t e ry Voltage:
Maximum PV current:
Maximum Load Current:
Self-Consumption:
C o n t rol Setpoints
Regulation Vo l t a g e
Load reconnect after low
voltage disconnect
B a t t e ry LVD voltage
*
SR7 Model
Other Specifications
Weight:
D i m e n s i o n s :
Voltage Dro p :
Operating
Te m p e r a t u re Range:
Te m p e r a t u re
Compensation
C o e ff i c i e n t :
Specifications subject to change without notice.
12.0 Vo l t s
7.0 Amps
7.0 Amps (SR7 only)
5.0 mA
S e a l e d F l o o d e d
B a t t e ry B a t t e ry
14.1 V
14.4 V
*
12.0 V
12.0 V
*
11.4 V
11.4 V
4 oz. (113.4 g)
4.4 x 2.5 x 1.8 in.
(11.18 x 6.35 x 4.57 cm)
0.3 Volts
-40°C to +80°C
-4mV/Cell/C°

Advertisement

loading

This manual is also suitable for:

Lyncom sr7c