Haier FCD-JTLD100 User Manual

Technical parameters

Rated voltage/ Rated Rated Waterproof
Frequency grade
power pressure
220V~/50Hz 2000W 0.7MPa IPX4
230V~/50Hz 2150W 0.7MPa IPX4
Packing list
Components Electric Relief valve /
Quantity
water heater drain hose
(Set) (Set)
Model
FCD-JTLD80 1
FCD-JTLD100 1
FCD-JTLD120 1
FCD-JTLD150 1
FAQ
Phenomenon Please check
No water outlet If the water supply system stops supplying
water or the water pressure is too low
If the water outlet is blocked.
If the hot water valve is turned on.
Cold water outlet only If the water temperature is adjusted
properly
If the thermostat fails
Heating time is too short
The amount and temperature If the pressure of tap water is stable
of the water delivered are
not stable
Do not heat after the power If the temperature limiter is activated due
is turned on (the heating to dry heating
lamp does not illuminate)
The heating indicator lamp Failed thermostat
stays on
Water is coming from the Overly high pressure (>0.7MPa)
relief valve or temperature (>99℃)
Features
1
Safety
High-quality heat proof stainless steel electric heating element, safe and reliable,
overtemperature protection, overpressure protection of tank.
2
Durability
The shell adopts dusting anticorrosion treatment, handsome and durable enamel tank. High
quality and reliability due to 3-layer inner tank enamel technology employed in inner tank
production.
3
Convenient operation
75℃ fixed temperature heating means it will stop heating automatically when the water
temperature reaches 75℃.
4
Multiple uses
Enclosed structure with several outlets can supply hot water to several places like the
washroom, kitchen etc (the hot water from it is not drinkable).
It is suitable for residential houses, enterprises, and service trades like beauty parlors or
hairdressers for supplying hot water.
5
Nice molding, space-saving.
The water heater you bought is the improved model of the series product. Please use it
according to the User's Manual.
Electric circuit diagram
MT
L
E
N
Connected to
inner tank
L: Brown wire
N: Blue wire
MT: High temperature limiter
BT: Thermostat
Dimensions/Weight/ Tap water pressure
Volume
See to Fig.1 no less than 0.05 MPa
See to Fig.1 no less than 0.05 MPa
3/4" Check Instruction Pipe
airproof met valve manual fitting
(Copy) (Pc) (Copy) (Copy)
1 2 1 1
1 2 1 1
1 2 1 1
1 2 1 1
Solutions
Check
Check and clear
Adjust again
Call the service
department
Continue to heat
Check
Call the service
department
Call the service
department
Call the service
department
Rev: 01
Specific Number: 0040502123
BT
EH
HL
HL: Heating indicator
EH: Heating element
E: Yellow/green wire
1
Haier Household Electric Water Heater Haier Household Electric Water Heater Haier Household Electric Water Heater
1
1
1
1
Please read this manual before usage.
Retain it for future reference.

Safety precautions

This symbol indicates actions you shall never do! Neglecting these instructions may
cause personal injury or even death.
This symbol indicates instructions you must observe! Neglecting these instructions
may cause personal injury or damage to your house or property.
• Check if the ammeter and wire
diameter are in accordance with the
rated current of the water heater.
Please have them checked by an
experienced electrician if necessary.
• The product is only available for
alternating current.
Be sure to use a separate socket (never
use a multifunctional socket) which is
reliably grounded and complies with
national standards. Dirt on the metal
pins of the power plug shall be wiped
off regularly to avoid fire or other
accidents.
To prevent being burned, please do not
face the shower nozzle towards your
body while turning the water valve.
If the power cord of the water heater is
damaged, be sure to have it replaced
by an after-sales service technician
with a special cord.
Set the power socket of the water
heater in a dry position away from
water. Never insert or pull the power
plug with wet hands to avoid electric
shock, injury or other accidents.

Setting environment

• Do not install it outdoor.
• Do not install it in a place without
drainage.
• Do not place it in a cold environment
where it tends to freeze. The tank
and the tubes may break if water in it
freezes. This may cause leakage and
scalding.
Sea-ox King Sea-ox King Sea-ox King
User's Manual User's Manual User's Manual
See to the physical product for the appearance, color or pattern.
Description of the symbols
• Before initial use after installation,
please first fully fill water and then
switch on the power. If it is powered
when the tank is not full of water, this
may cause overheating of the heating
element. Children must use under the
supervision of an adult.
• During winter in cold areas, if the heater
is not used for a long period, please
unscrew the blow down nut to drain the
water to avoid damage caused by icing.
Please remember to fill it with water
before turning on the power when it is
used again. The hot water tube may be
relatively long due to the installation
location of the water heater. Please drain
the cold water before use each time to
avoid getting cold water.
• Do not use electrical products with
damaged power cords or loose power
sockets and plugs. Otherwise electric
shock, short circuit, fire or other
accidents may occur. Please make sure
the plug fits tightly with the socket.
If drain hose is connected, please
connect it to the inlet of the sewer to
avoid polluting by splashing.
2
FCD-JTLD80
FCD-JTLD100
FCD-JTLD120
FCD-JTLD150