Magellan RoadMate 3000T - Automotive GPS Receiver Installation Instructions

Magellan

Installation Instructions

1.
a
b
c
These are the items that you will need to install your
TrafficKit: (a) TrafficKit Receiver, (b)
RoadMate Receiver and (c) TrafficKit FM Antenna.
4.
Next, locate the FM Antenna.
7.
Attach the cradle and mount to the Magellan
RoadMate 3000T.
©2006 Magellan Navigation, Inc. All rights reserved. The Magellan logo, Magellan, Magellan RoadMate, TrafficKit and Turn it on and go are trademarks of Magellan Navigation, Inc.
®
TrafficKit
2.
Locate the TrafficKit Receiver.
Magellan
5.
Plug the FM Antenna into the TrafficKit Receiver.
Make sure you push the connector all the way.
8.
Mount the assembly in your vehicle using the method
desired (windshield, adapter plate or other). Attach
the FM antenna to the vehicle's windshield using the
suction cups. The antenna should be placed in an
area where it will be able to receive traffic signals.
™
Turn it on and go
3.
Connect the TrafficKit Receiver to the right side of the
Magellan RoadMate as indicated.
6.
Attach the Cigarette Lighter Adapter to the
TrafficKit Receiver.
9.
Make sure you have the power cable looped into the
stress relief loop as seen here.
™