Electrical requirements Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home, if you are in any doubt about your supply contact your local electricity company. The flexible mains lead is supplied connected to a B.S.
SAFETY WARNINGS • This machine is designed to “make coffee” and to “heat drinks”: be careful to avoid scalding from the water and steam jets or by using the machine incorrectly. • Do not touch hot parts (steam and hot water tube, boiler outlet, areas in contact with the filter holder and the warming plate).
Page 5
CHLORINE FILTER (if fitted) The filter eliminates the taste of chlorine from the water.To install the filter, proceed as follows : • Remove the chlorine filter from the plastic bag and rinse it in tap water. • Lift the coffee lid, remove the filter holder from its housing by lifting it upwards (Fig.
Page 6
• Place the ground coffee in the filter, using the measuring spoon supplied, and level evenly (Fig. 8). As a general rule, use a level measuring spoon of ground coffee (around 7 grams) for each cup (for example, 12 spoons to make 12 cups).The quantity of ground coffee used may, however, be varied according to per- sonal taste.
CLEANING AND MAINTENANCE Before performing any cleaning or maintenance operations, turn the machine off, unplug it from the power socket and allow it to cool down. 1. When cleaning the coffee maker, do not use solvents or abra- sive detergents. A soft, damp cloth is sufficient. 2.
TROUBLESHOOTING Problem Probable cause The drip coffee The drip coffee takes longer to per- maker needs to be colate descaled The coffee maker The coffee has a has not been rinsed vinegary taste sufficiently Coffee Maker EC190/200 Solution Perform the descaling procedure as described in the paragraph...