Fan Operating Instructions - Silhouette DPAC120061 Owner's Manual

Fan Operating Instructions

NOTE: The exhaust hoses are not required
during FAN only mode operation.
1) Press the I/O (on/off) key pad to switch on
the unit. See Fig H(1).
2) Press the MODE key (Fig H(2)) until the FAN
symbol illuminates in the display window. Each
depression of the MODE key will advance to a
different mode setting (Cool-Dry-Fan).
3) Press the FAN key to select the desired FAN
SPEED setting. Your selection will appear in the
display window (Fig I). Each depression of the
fan key will advance to a different fan speed
(Low-Med-High).
4) Press the SWING key to activate the automatic
air swing (oscillating) feature (the air swing
symbol will appear in the display window, Fig J).
To deactivate the air swing feature, press the
SWING key again.
5) To adjust "air flow" direction, (up / down only)
adjust the center Horizontal Louver Blade and
the remaining louvers will automatically adjust to
the same position. See Fig. 25
Fig. 25
1
12
2
Fig H
Fig I
Fig J